AN ANALYSIS OF THE DYNAMIC THEORY OF THE MULTI—PRODUCT FIRM USING THE CALCULUS OF VARIATIONS

The purpose of this paper is to present the theory of the multi-product firm in situations where the revenue function depends not only on the rate of output but also on changes in the rate of output, and, similarly, where the cost function depends on changes in the rate of factor utilization as well as the rate of their utilization. Since the analysis will utilize the calculus of variations, a general introduction to this technique is also presented. The model analyzed assumes perfect foresight and knowledge concerning the revenue, cost, and production functions, and the calculus of variations is used to derive the conditions for an extremum. The first section presents the mathematical model and the model of the firm, and the optimality conditions are discussed in the second section.     

ANALYZING GEOGRAPHICALLY DISCRETE WAREHOUSING NETWORKS BY COMPUTER SIMULATION*

This paper describes a comprehensive simulation modeling approach to the problem of locating warehousing facilities in a fashion that minimizes the cost associated with operating a multi-product, multi-source, multi-destination distribution system. The digital simulation model presented in the study is derived within an “industrial dynamics” framework, utilizes input from an existing management information system, and employs a number of relatively simple heuristic procedures to analyze various alternative warehousing networks. Simulation results, in terms of the distribution costs associated with various warehouse locations, are presented for cases involving the effect of provision of a 100% service level, the effect of constraining product availability and/or inventory capacities at various warehouses, and the effect of deleting various warehouses from the existing warehouse network.     

A new heteroscedastic regression to analyze mass loss of wood in civil construction in Brazil

A heteroscedastic regression based on the odd log-logistic Marshall–Olkin normal (OLLMON) distribution is defined by extending previous models. Some structural properties of this distribution are presented. The estimation of the parameters is addressed by maximum likelihood. For different parameter settings, sample sizes and some scenarios, various simulations investigate the performance of the heteroscedastic OLLMON regression. We use residual analysis to detect influential observations and to check the model assumptions. The new regression explains the mass loss of different wood species in civil construction in Brazil.     

An integrated production and inventory model for a whole manufacturing supply chain involving reverse logistics with finite horizon period

This paper proposes a model and solution method for coordinating integrated production and inventory cycles in a whole manufacturing supply chain involving reverse logistics for multiple items with finite horizon period. A whole manufacturing supply chain involving reverse logistic consists of tier-2 suppliers supplying raw materials to tier-1 suppliers, tier-1 suppliers producing parts, a manufacturer which manufactures and assembles parts from tier-1 suppliers into finished products, distributors distributing finished products to retailers, retailers selling products to end customers and a third party which collects the used finished products from end customers, dissembles collected products into parts, and feed the parts back to the supply chain. In this system, we consider a finite horizon period. A mathematical model for representing the behaviors of the system is developed. Solution methods based on decentralized and a combination of decentralized and centralized decision making process, referred to as the semi-centralized decision making process, are proposed to solve the model while the centralized decision making process is solved by a mixed integer nonlinear programming method. A numerical example is used to demonstrate the model and the solutions based on the three types of the coordination.     

Cost/quality tradeoffs for control procedures in information systems

An analytical framework is presented to study the cost/benefit tradeoffs of alternative internal control scenarios designed to ensure quality of outputs from information systems. A mathematical model is used to evaluate the impact that various alternatives have on system performance and cost. The model can be used to compare the benefits gained from enhanced processing with those arising from more effective internal control procedures. Model variables under the control of system designers include placement and effectiveness of internal control procedures, cost and quality of processing activities, both manual and computerized, and cost and quality of correction procedures. The model incorporates a penalty cost incurred by failure to detect and correct errors. The analytical process is illustrated through application to a specific information system.     

盈余重述归因分析——资产负债表膨胀的角度

针对国内外学者对财务重述原因的争议,在借鉴已有研究成果的基础上,本文从资产负债表膨胀的角度对盈余重述进行了归因分析。以高报盈余的重述公司为对象,利用多元回归分析等方法实证后发现,与非重述公司相比,高报盈余的重述公司在财务报告发生错误的年度资产负债表膨胀水平较高,说明公司被重述期正向调整了盈余,重述归因于公司之前年度有意的盈余管理;违规公司被重述期期初的资产负债表膨胀度显著高于非违规公司,证明公司违规主要是由于会计准则弹性范围内调整盈余的机会受限。     

Examining Localized Patterns of Air Quality Perception in Texas: A Spatial and Statistical Analysis

Environmental and human health issues associated with outdoor air pollution, such as ozone, sulfur dioxide, and other pollutants in metropolitan regions, are an area of growing concern for both policy officials and the general public. Increasing attention from the news media, new health data, and public debate over the effectiveness of clean air regulations have raised the importance of air quality in the public consciousness. While public perceptions of air quality have been studied thoroughly dating back to the 1960s, little empirical research has been conducted to explain the spatial aspects of these perceptions, particularly at the local level. Although recent studies suggest characteristics of local setting are important in shaping perceptions of air quality, the roles of proximity, neighborhood characteristics, and location have not been clarified. This study seeks to improve understanding of the major factors shaping public perceptions of air quality by examining the spatial pattern of local risk perception, the role of socioeconomic characteristics in forming these perceptions, and the relationship between perceived and scientifically measured air pollution. First, we map the spatial pattern of local air quality perceptions using Geographic Information Systems (GIS) across the Dallas and Houston metropolitan areas. Next, we explain these perceptions through local contextual factors using both bivariate correlations and multivariate regression analysis. Results indicate that perceptions of air quality in the study areas are not significantly correlated with air quality based on readings of air monitoring stations. Instead, perceptions appear to be influenced by setting (urban vs. rural), state identification, access to information, and socioeconomic characteristics such as age, race, and political identification. We discuss the implications of the findings and provide direction on how further research can provide a deeper understanding of the local contextual factors influencing public perceptions.     

Solving the part families problem in discrete-parts manufacture by simulated annealing

In the production planning and control of discrete-parts manufacture, aggregation of parts into families, on the basis of similarity, is carried out to ease both long-horizon planning and short-horizon scheduling. Additional advantages are related to those of group technology (GT), such as simplifying the flow of parts and tools and reducing both set-up and production costs. The problem of formally forming part families is presented and discussed. Previous work is reviewed and assessed. Two solution approaches, one based on a location model, the other on simulated annealing, are presented and compared along with test results. The location formulation, which results in an integer programming model solved by Lagrangian relaxation, proved capable of producing solutions of excellent quality, but only for relatively small problem instances. In contrast, simulated annealing, which is a general heuristic approach to combinatorial optimization, produced solutions of comparable quality and could handle realistically large problem instances. However, careful design of the simulated annealing algorithm is crucially important. An effective design is presented.     

Estimation of the parameters of symmetric stable ARMA and ARMA–GARCH models

In this article, we first propose the modified Hannan–Rissanen Method for estimating the parameters of autoregressive moving average (ARMA) process with symmetric stable noise and symmetric stable generalized autoregressive conditional heteroskedastic (GARCH) noise. Next, we propose the modified empirical characteristic function method for the estimation of GARCH parameters with symmetric stable noise. Further, we show the efficiency, accuracy and simplicity of our methods with Monte-Carlo simulation. Finally, we apply our proposed methods to model the financial data.     

后现代主义教育视野下的师生观

后现代主义(postmodernism)是20世纪后半叶在西方社会流行的一种哲学、文化思潮。它脱胎于信息化后工业社会。后现代教育思想作为整个后现代思潮的一部分,它强调个人选择和参与,崇尚创造性、差异性、多样性、不确定性和建构性,主张教师与学生之间应建立一种平等的对话关系。这对我国当前的教育研究及教育改革,尤其是课堂教学改革具有一定的指导意义。