冷却剂参数对铣槽喷管低周疲劳寿命的影响

采用有限体积流固耦合计算方法、非线性有限元热结构耦合分析方法和局部应变法研究大面积比铣槽喷管三维再生冷却槽道在循环工作条件下的热结构变形与低周疲劳寿命,并对比分析了冷却剂质量流量与入口温度对铣槽喷管疲劳使用寿命的影响。计算结果表明,铣槽喷管热结构响应呈现复杂的三维效应,应变较大位置主要分布在与肋连接的内衬区域,喷管中部的残余应变量最大;冷却槽道低周疲劳寿命分布和热结构响应基本一致,最小寿命位于喷管中部与肋相连的内衬区域燃气侧;随冷却剂质量流量增加,铣槽喷管低周疲劳寿命不断提高;随冷却剂入口温度增加喷管尾部低周疲劳寿命值不断降低,而喷管中前部的低周疲劳寿命值却不断提高,当冷却剂入口温度为280K左右时,本文的铣槽喷管总体使用寿命达到最大。      

Assessing Effects on Long-term Survival after Early Termination of Randomized Trials

In this paper we present an approach to using historical control data to augment information from a randomized controlled clinical trial, when it is not possible to continue the control regimen to obtain the most reliable and valid assessment of long term treatment effects. Using an adjustment procedure to the historical control data, we investigate a method of estimating the long term survival function for the clinical trial control group and for evaluating the long term treatment effect. The suggested method is simple to interpret, and particularly motivated in clinical trial settings when ethical considerations preclude the long term follow-up of placebo controls. A simulation study reveals that the bias in parameter estimates that arises in the setting of group sequential monitoring will be attenuated when long term historical control information is used in the proposed manner. Data from the first and second National Wilms' Tumor studies are used to illustrate the method.     

洗衣机发展预测模型及应用

我国洗衣机的生产发展十分迅速,从1978年的年产400台到1985年的883万台,八年间增长二千多倍,今后的生产发展前景如何?运用本文介绍的一种预测模型,可以求得公元2000年以前每年洗衣机需求量的预测值,并求得1983年8月至1991年1月为洗衣机生产发展的成熟时期,该模型亦可用于其它耐用消费品的生产发展预测,所得结果可供有关部门决策时参考。     

注重素质培养,实现教育实习的目的

面对实习学校设备参差不齐,指导教师素质有高有低,实习学生来源、民族、性别比例不均的状况,我校教育实习相应地采取了城乡结合式、基地式等多种形式.在实习中,通过准备、实习、总结三个阶段,加强学生教风、教态、仪表、行为、着装、语言和板书的专门素质教育,以期达到教育实习的目的.     

An efficient sequential design of clinical trials

We propose an efficient group sequential monitoring rule for clinical trials. At each interim analysis both efficacy and futility are evaluated through a specified loss structure together with the predicted power. The proposed design is robust to a wide range of priors, and achieves the specified power with a saving of sample size compared to existing adaptive designs. A method is also proposed to obtain a reduced-bias estimator of treatment difference for the proposed design. The new approaches hold great potential for efficiently selecting a more effective treatment in comparative trials. Operating characteristics are evaluated and compared with other group sequential designs in empirical studies. An example is provided to illustrate the application of the method.     

国际上非基准年购买力平价推算方法评价

 全球国际比较项目大约每隔5年或6年调查一次,有关国际组织应用总量外推法、分类项目外推法、基期滚动法和简缩信息法等方法推算非基准年的PPP数据,以便取得完整的连续时间序列。本文对国际上常用的各种非基准年PPP推算方法和结果作详细分析、评价。     

Maximum likelihood estimation of the bimodal failure rate for censored and tied observations

DIMITROV, RACHEV and YAKOVLEV ( 1985 ) have obtained the isotonic maximum likelihood estimator for the bimodal failure rate function. The authors considered only the complete failure time data. The generalization of this estimator for the case of censored and tied observations is now proposed.     

Modeling of covariance structures of random effects and random errors in linear mixed models

Abstract

In this paper, we discuss how to model the mean and covariancestructures in linear mixed models (LMMs) simultaneously. We propose a data-driven method to modelcovariance structures of the random effects and random errors in the LMMs. Parameter estimation in the mean and covariances is considered by using EM algorithm, and standard errors of the parameter estimates are calculated through Louis’ (1982 Louis, T.A. (1982). Finding observed information using the EM algorithm. J. Royal Stat. Soc. B 44:98–130. [Google Scholar]) information principle. Kenward’s (1987 Kenward, M.G. (1987). A method for comparing profiles of repeated measurements. Appl. Stat. 36:296–308.[Crossref], [Web of Science ®] , [Google Scholar]) cattle data sets are analyzed for illustration,and comparison to the literature work is made through simulation studies. Our numerical analysis confirms the superiority of the proposed method to existing approaches in terms of Akaike information criterion.     

An Extension of Economic Design of x-Bar Control Charts for Non Normally Distributed Data Under Weibull Shock Models

Three parameters—sample size, sampling intervals, and the control limits—must be determined when the x bar chart to monitor a manufacturing process. The constant sampling intervals were widely employed because of its administrative simplicity. However, the variable sampling interval (VSI) has recently been shown to give substantially faster detection of most process shifts than fixed-sampling-interval (FSI) for x-bar charts. In addition, these measurements in the subgroup are assumed to be normally distributed. That assumption may not be tenable. This investigation compares the economic design of x-bar control charts for non normal data under Weibull shock models with various sampling avenues.     

Concurrent Design for Process Quality,Statistical Tolerance,and SPC

The rapid response to the requirements of customers and markets promotes the concurrent engineering (CE) technique in product and process design. The decision making for process quality target, SPC method, sampling plan, and control chart parameter design can be done at the stage of process quality plan based on historical data and process knowledge database. Therefore, it is a reasonable trend to introduce the concepts and achievements on process quality evaluation and process capability analysis, CE, and SPC techniques into process plan and tolerance design. A new systematic method for concurrent design of process quality, statistical tolerance (ST), and control chart is presented based on a NSFC research program. A set of standardized process quality indices (PQIs) for variables is introduced for meeting the measurement and evaluation to process yield, process centering, and quality loss. This index system that has relatively strong compatibility and adaptability is based on raisonne grading by using the series of preferred numbers and arithmetical progression. The expected process quality based on this system can be assured by a standardized interface between PQIs and SPC, that is, quality-oriented statistical tolerance zone. A quality-oriented ST and SPC approach that quantitatively specifies what a desired process is and how to assure it will realize the optimal control for a process toward a predetermined quality target.