Proper manual handling techniques to prevent low back pain, a Cochrane systematic review

Training and provision of assistive devices are considered major interventions to prevent and treat low back pain (LBP) among workers exposed to manual material handling (MMH). To establish the effectiveness of training and provision of assistive devices in preventing and treating LBP an update of a Cochrane literature review was performed to November 2010. Randomised controlled trials (RCTs) and cohort studies with a concurrent control group (CCTs) were included. Nine RCTs (20.101 employees) and nine CCTs (1280 employees) were included for prevention: six more than in the previous version. No study on treatment was found. None of the included RCTs and CCTs provided evidence that training and provision of assistive devices prevented LBP when compared to no intervention or another intervention.     

Participatory design in lean production: which contribution from employees? For what end?

The proponents of lean production have pointed to the positive effects of the work organization on employees in terms of autonomy, enhanced skills and empowerment mainly by their participation into the continuous improvement of work process. But studies that have examined this issue suggest that the increase in autonomy is not sufficient to compensate for increases work intensity. Participatory design has grown extensively in manufacturing since the 1980's under the impulsion of the Scandinavian socio-technical system approach and it's central in the model of lean production performance. Its main objectives are to improve quality, increase productivity and safety through employee's participation to the reduction of non-value added activities, such as defined by lean production. In the line of the studies on participatory design and continuous improvement the present study examines the functioning of work groups, based on the kaizen model, the aim of which was to improve the proportion of "value-added activities" and working conditions, essentially physical constraints. The main results are consistent with the literature and show that accelerated forms of re-conception activities give employees limited room for maneuver to elaborate solutions based on the analysis of the real activity. This study is part of a broader initiative that goes in the direction of continuous improvement of the design process itself so that it integrates the real constraints of work and propose changes bases on work as it actually takes place, beyond pre-established performance goals bases on the reduction of "non added value activities".     

Designing for multiple global user populations: increasing resource allocation efficiency for greater sustainability

This paper proposes a method to identify opportunities for increasing the efficiency of raw material allocation decisions for products that are simultaneously targeted at multiple user populations around the world. The values of 24 body measures at certain key percentiles were used to estimate the best-fitting anthropometric distributions for female and male adults in nine national populations, which were selected to represent the diverse target markets multinational companies must design for. These distributions were then used to synthesize body measure data for combined populations with a 1:1 female:male ratio. An anthropometric range metric (ARM) was proposed for assessing the variation of these body measures across the populations. At any percentile, ARM values were calculated as the percentage difference between the highest and lowest anthropometric values across the considered user populations. Based on their magnitudes, plots of ARM values computed between the 1st and 99 th percentiles for each body measure were grouped into low, medium, and high categories. This classification of body measures was proposed as a means of selecting the most suitable strategies for designing raw material-efficient products. The findings in this study and the contributions of subsequent work along these lines are expected to help achieve greater efficiencies in resource allocation in global product development.     

A study of material composition disclosure practices in green footwear products

This work is based on the study of pioneering sustainable product development initiatives, and the analysis was guided by the cradle-to-cradle concept, which sees the waste of a given process as raw material for another, just like it happens in nature. Several studies on human factors have focused on factory conditions and workers dealing with product assembly. This research, however, relates more to consumer behavior, product use and end-of-life. The purchase of more environmentally- friendly products, in particular, is heavily influenced by the information made available by the companies. In this scenario, this article discusses three early but notable efforts on green product development, focusing on the disclosure practices adopted by the companies regarding the composition of their products. Research and data collection has focused on the footwear industry, whose products satisfy a basic human need and are ubiquitous worldwide. The use of hazardous materials and chemicals in shoe manufacturing, particularly the use of chromium - a highly toxic element - in addition to toxic solvents and adhesives and non-recyclable synthetic materials can pose serious risks to human health and the environment, even though the consumer usually is not aware of all the relevant characteristics of this kind of product.     

State of scientific knowledge about the need of recovery time at specific workplaces and recommendations for further research

Research activities to determine the need of recovery time at work were mainly performed in the 1970s and 1980s. Previous studies were largely based on expert opinions or were generated within small and non-representative groups. Often, laboratory experiments were carried out with a low number of subjects. Especially during the last decade, only little additional scientific knowledge was generated on this topic. The very resource intensive development of more detailed results based on the existing level of scientific knowledge is assumed as one reason for this. In general, it seems to be reasonable to continue further research on the knowledge generated in previous studies, but implement larger samples and more representative groups. Besides, according to monotonous manual work, more research is especially needed regarding relative operating forces and operation frequencies taken grip conditions and hand/body position into account.     

Managing unforeseen events in anesthesia: collective trade-off between "understanding" and "doing"

This study aims to describe how anesthesia teams handle unforeseen events that may affect the patients' health. More precisely, it investigates the mechanisms of decisions made by anesthesia teams to manage unthought-of situations, i.e. situations that have not been foreseen as "possible" ones before their occurrence. An empirical study, based on the analysis of simulated situations, was conducted in a pediatric anesthesia service of a university hospital in France. The results highlighted three ways of managing unthought-of situations (determined management, cautious management and overwhelmed management). They support the hypothesis of a collective cognitive trade-off, whereby teams would behave as virtual operators, with their own collective trade-off between "understanding" and "doing". The discussion of the results questions the assessment criteria, the safety perspectives we adopt and the possible ways to improve the management of unforeseen situations.     

Burnout syndrome, working conditions, and health: a reality among public high school teachers in Brazil

The objective of the study was to evaluate the occurrence of Burnout Syndrome in 100 teachers of six public high schools and its correlation with working conditions in a southeast city of Brazil. Characterization of the sample occurred after application of a socio-demographic questionnaire. Evaluation of the working conditions was done by means of an Ergonomic Working Analysis. The presence of Burnout Syndrome was evaluated by means of the Maslach Burnout Inventory. The sample presented the predominance of women, with an average age of 40.4 and the majority married with children. Roughly 50% had less than 10 years of service, and more than half of the teachers taught more than 18 classes per week. Hoarseness after work was principally reported among women, which required many days off for health treatment. Environmental conditions reflect inadequacy in relation to noise, light, humidity and temperature. Presence of pain in the upper limbs was especially high among women. Risk of musculoskeletal disorders in the upper limbs predominated as moderately important to significant. We also identified an average distance walked by teachers of 1.5 Km and an average of 4.2 Kg of school supplies carried between classes. The Burnout Syndrome presented a high score for depersonalization principally among men, but it has association with both sexes. Emotional exhaustion correlates with noise, depersonalization, and personal fulfillment, in addition to the high number of weekly lessons. It can be concluded that Burnout syndrome is present among teachers, principally in terms of depersonalization, deserving the attention of government officials and the schools, as well as the teachers themselves.     

Virtual reality based therapy for post operative rehabilitation of children with cerebral palsy

Virtual reality is the use of interactive replication created with computer hardware and software to impart users with opportunities to engage in environments that appear to feel similar to real world objects and events. The commonest rehabilitation program of cerebral palsy children involves stretching, strengthening, mobilization and various other activities, whereas the use of virtual reality based training (VRBT) for rehabilitation of cerebral palsy is not common. To understand the effect of VRBT a study was formulated. Twenty nine subjects participated (study group--14 and control group--15). Outcome measures were MACS, PBS, level of participation, motivation, cooperation and satisfaction of the child. Results revealed that balance and manual ability were significantly improved in both the groups (Balance: study: t-2.28, p<0.05; control: t-3.5, p<0.01; Manual ability: study: t-5.58, p<0.001; control: t-7.06, p<0.001). PBS had significantly greater improvement in the study group (t-t-2.02, p<0.05). Level of participation, motivation, cooperation and satisfaction of the child were also reported to be significantly higher among the study group as compared with control group. To the author's best knowledge, this is the first study on using the VR-based therapy for the postoperative rehabilitation of children with CP which need further elaboration with larger sample size.     

Design recommendations for the creation of icons for the elderly

During employment of icons in order to represent system functions, specific user requirements from elderly people have not been scientifically gathered and thus will merely be considered during the process of system design. The survey, with explicit consideration of technology acceptance and experience of 120 elderly probands, looked into the comprehension of four different classes of non-animated graphical representations. It was shown that among elderly, the use of photos compared to pictograms or clip art leads to a significantly higher recognition rate. The mapping of actions rather than objects leads to a further reduction of the error probability and is thus, especially in the context of telemedicine, preferable for the target group.     

Cognitively automated assembly processes: a simulation based evaluation of performance

The numerical control of an experimental assembly cell with two robots--termed a cognitive control unit (CCU)--is able to simulate human information processing at a rule-based level of cognitive control. To enable the CCU to work on a large range of assembly tasks expected of a human operator, the cognitive architecture SOAR is used. The CCU can plan assembly processes autonomously and react to ad-hoc changes in assembly sequences effectively. Extensive simulation studies have shown that cognitive automation based on SOAR is especially suitable for random parts supply, which reduces planning effort in logistics. Conversely, a disproportional increase in processing time was observed for deterministic parts supply, especially for assemblies containing large numbers of identical parts. In this contribution, the effect of phase-shifts in deterministic part supply is investigated for assemblies containing maximal different parts. It can be shown that the concept of cognitive automation is as well suitable for these planning problems.