Fitting Hierarchical Holographic Modeling into the Theory of Scenario Structuring and a Resulting Refinement to the Quantitative Definition of Risk

A point of view is suggested from which the Hierarchical Holographic Modeling (HHM) method can be seen as one more method within the Theory of Scenario Structuring (TSS), which is that part of Quantitative Risk Assessment having to do with the task of identifying the set of risk scenarios. Seen in this way, HHM brings strongly to our attention the fact that different methods within TSS can result in different sets of risk scenarios for the same underlying problem. Although this is not a problem practically, it is a bit awkward conceptually from the standpoint of the "set of triplets" definition of risk, in which the scenario set is part of the definition. Accordingly, the present article suggests a refinement to the set of triplets definition, which removes the specific set of scenarios, found by any of the TSS methods, from the definition of risk and casts it, instead, as an approximation to the "true" set of scenarios that is native to the problem at hand and not affected by the TSS method used.     

组织网络隐性知识扩散及学习策略分析

知识主要以显性知识和隐性知识两种方式存在,隐性知识是组织获得竞争优势的主要源泉.隐性知识为组织个体所拥有,这种私有性的特征使其在组织内部的扩散需要通过组织个体之间的交互才能完成.组织网络连接强度对扩散具有影响,可利用具有边权重的组织网络研究隐性知识的扩散行为.在分析隐性知识和相关扩散特点的基础上,基于组织成员之间的关系网络和小世界网络模型,建立组织网络上的知识扩散模型.根据认识论的观点,提出个体3种知识学习策略,结合知识扩散模型进行计算仿真实验.仿真结果显示,综合考虑关系和知识差别的知识学习策略最有效,不考虑连接强度下的各种策略都具有较快的知识学习速率,并且连接强度对组织内隐性知识扩散具有明显的作用.     

The empirical analysis of the -bilateral optimized combinatorial auction model

This study proposes a new and highly efficient dynamic combinatorial auction mechanism—the N-bilateral optimized combinatorial auction (N-BOCA). N-BOCA is a flexible iterative combinatorial auction model that offers more optimized trading for multiple suppliers and purchasers in the supply chain than one-sided combinatorial auction. We design the N-BOCA model from the perspectives of market architecture, trading rules, and decision strategy for winner determination, the decision strategy for winner determination needs flexible optimization modeling capability. Thus rule-based reasoning was applied for reflecting the flexible decision strategies. We also show the viability of N-BOCA through Paired Samples T-test experimentation. It shows that N-BOCA yields higher purchase efficiency and effectiveness than the one-auctioneer to multi-bidders (1-to-N) combinatorial auction mechanism.     

基于元胞自动机的知识型组织中知识传播过程仿真研究

建立了知识型组织中知识型成员间知识传播过程的元胞自动机模型,对知识型成员间隐性知识传播过程的影响因素、传播规律等进行了仿真研究。模拟结果表明:知识型成员间的信任、知识传播者的意愿和影响力与知识传播速度正相关;扁平化的组织结构有利于知识自下而上的传播;当组织知识水平达到最优传播规模时,组织的知识传播瞬时速度将达到最大值。     

学习型组织中的虚拟团队知识共享模型研究

传统的知识共享理论不能直接应用到虚拟团队知识共享研究之中,为克服虚拟团队知识共享存在的障碍,对交互记忆系统运作的核心--元记忆目录进行了扩展,加入元知识和社会网络2个维度,以帮助虚拟团队解决统一知识表述、规范专长认知、知识资源描述和展现内部实际沟通网络等问题.以扩展性元记忆目录为核心,建立了基于交互记忆理论的虚拟团队知识共享模型,并对知识共享模型各因素的相互关系进行了分析,提出了未来研究的结构方程模型.     

并行工程产品开发过程定量化建模与计划制订

由于现有的一些并行工程定量化模型中修改设计微循环的细节特征描述得还不够充分 ,本文提出了一种新的基于产品 -工艺设计活动对网络的定量化模型来描述并行工程产品开发过程 ,并且给出了产品 -工艺设计活动对平均持续时间与产品或工艺设计活动资源占用率的计算方法 .在此基础上 ,将并行工程产品开发过程的计划制订问题建模成一个有资源约束的项目调度问题 .与其它此类问题不同的是 ,在本文中 ,分配给产品开发项目的各类资源的数量不是事先给定的 ,而是与最优产品开发计划一起获得的 ,所以这是一个资源分配与计划制订的集成优化问题 .本文提出了一种新的基于分枝定界的算法来解决此问题并引入一个启发式规则来提高算法的搜索效率     

Improved Transferability of Data‐Driven Damage Models Through Sample Selection Bias Correction

Damage models for natural hazards are used for decision making on reducing and transferring risk. The damage estimates from these models depend on many variables and their complex sometimes nonlinear relationships with the damage. In recent years, data‐driven modeling techniques have been used to capture those relationships. The available data to build such models are often limited. Therefore, in practice it is usually necessary to transfer models to a different context. In this article, we show that this implies the samples used to build the model are often not fully representative for the situation where they need to be applied on, which leads to a “sample selection bias.” In this article, we enhance data‐driven damage models by applying methods, not previously applied to damage modeling, to correct for this bias before the machine learning (ML) models are trained. We demonstrate this with case studies on flooding in Europe, and typhoon wind damage in the Philippines. Two sample selection bias correction methods from the ML literature are applied and one of these methods is also adjusted to our problem. These three methods are combined with stochastic generation of synthetic damage data. We demonstrate that for both case studies, the sample selection bias correction techniques reduce model errors, especially for the mean bias error this reduction can be larger than 30%. The novel combination with stochastic data generation seems to enhance these techniques. This shows that sample selection bias correction methods are beneficial for damage model transfer.     

Incorporating Time‐Dose‐Response into Legionella Outbreak Models

A novel method was used to incorporate in vivo host–pathogen dynamics into a new robust outbreak model for legionellosis. Dose‐response and time‐dose‐response (TDR) models were generated for Legionella longbeachae exposure to mice via the intratracheal route using a maximum likelihood estimation approach. The best‐fit TDR model was then incorporated into two L. pneumophila outbreak models: an outbreak that occurred at a spa in Japan, and one that occurred in a Melbourne aquarium. The best‐fit TDR from the murine dosing study was the beta‐Poisson with exponential‐reciprocal dependency model, which had a minimized deviance of 32.9. This model was tested against other incubation distributions in the Japan outbreak, and performed consistently well, with reported deviances ranging from 32 to 35. In the case of the Melbourne outbreak, the exponential model with exponential dependency was tested against non‐time‐dependent distributions to explore the performance of the time‐dependent model with the lowest number of parameters. This model reported low minimized deviances around 8 for the Weibull, gamma, and lognormal exposure distribution cases. This work shows that the incorporation of a time factor into outbreak distributions provides models with acceptable fits that can provide insight into the in vivo dynamics of the host‐pathogen system.     

Construction Safety Risk Modeling and Simulation

By building on a genetic‐inspired attribute‐based conceptual framework for safety risk analysis, we propose a novel approach to define, model, and simulate univariate and bivariate construction safety risk at the situational level. Our fully data‐driven techniques provide construction practitioners and academicians with an easy and automated way of getting valuable empirical insights from attribute‐based data extracted from unstructured textual injury reports. By applying our methodology on a data set of 814 injury reports, we first show the frequency‐magnitude distribution of construction safety risk to be very similar to that of many natural phenomena such as precipitation or earthquakes. Motivated by this observation, and drawing on state‐of‐the‐art techniques in hydroclimatology and insurance, we then introduce univariate and bivariate nonparametric stochastic safety risk generators based on kernel density estimators and copulas. These generators enable the user to produce large numbers of synthetic safety risk values faithful to the original data, allowing safety‐related decision making under uncertainty to be grounded on extensive empirical evidence. One of the implications of our study is that like natural phenomena, construction safety may benefit from being studied quantitatively by leveraging empirical data rather than strictly being approached through a managerial perspective using subjective data, which is the current industry standard. Finally, a side but interesting finding is that in our data set, attributes related to high energy levels (e.g., machinery, hazardous substance) and to human error (e.g., improper security of tools) emerge as strong risk shapers.     

A Stochastic Model to Assess the Effect of Meat Inspection Practices on the Contamination of the Pig Carcasses

The objective of meat inspection is to promote animal and public health by preventing, detecting, and controlling hazards originating from animals. With the improvements of sanitary level in pig herds, the hazards profile has shifted and the inspection procedures no longer target major foodborne pathogens (i.e., not risk based). Additionally, carcass manipulations performed when searching for macroscopic lesions can lead to cross‐contamination. We therefore developed a stochastic model to quantitatively describe cross‐contamination when consecutive carcasses are submitted to classic inspection procedures. The microbial hazard used to illustrate the model was Salmonella, the data set was obtained from Brazilian slaughterhouses, and some simplifying assumptions were made. The model predicted that due to cross‐contamination during inspection, the prevalence of contaminated carcass surfaces increased from 1.2% to 95.7%, whereas the mean contamination on contaminated surfaces decreased from 1 logCFU/cm² to ?0.87 logCFU/cm², and the standard deviations decreased from 0.65 to 0.19. These results are explained by the fact that, due to carcass manipulations with hands, knives, and hooks, including the cutting of contaminated lymph nodes, Salmonella is transferred to previously uncontaminated carcasses, but in small quantities. These small quantities can easily go undetected during sampling. Sensitivity analyses gave insight into the model performance and showed that the touching and cutting of lymph nodes during inspection can be an important source of carcass contamination. The model can serve as a tool to support discussions on the modernization of pig carcass inspection.