利用数控增益放大器提高A/D转换器的分辨率

文章介绍利用数控增益放大器LH0086大幅度提高A／D转换器分辨率的方法,可将8位A／D转换器的分辨率提高到接近16位A／D的水平,适用于高速数据系采集系统,给出了相应的硬件原理图和软件框图。     

Data relaying with constraints in hierarchical sensor networks

In this paper we present and discuss several optimisation problems that arise in the management of data flow in wireless sensor networks (WSNets). We consider a hierarchical architecture for WSNets composed of sensors, relays, and relay gateways. Sensors send data they generate at a known average bit rate to relays in one hop. The relay nodes use a multi-hop mechanism to reach a set of assigned gateways which then forward the data directly to the base station. We are concerned with finding an assignment of relay gateways to relays so that certain constraints are satisfied. We define a unified model in which constraints such as lifetime, data delay, and data flow splitting are formulated in terms of four optimisation problem in graphs.     

Substance use disorders and referral to treatment in substantiated cases of child maltreatment

Parents with substance use disorders (SUD) require treatment and support in order to provide children with appropriate care and protection. Using the 2012 National Child Abuse and Neglect Data System (NCANDS), this paper analysed 464 313 substantiated child maltreatment reports to determine (i) the proportion and characteristics of reports involving substance abuse; and (ii) the child and caregiver/perpetrator (C/P) characteristics that predicted referral to treatment as recorded in service plans. Findings indicate that 12% (N = 53 234) of maltreatment reports involved C/P SUD. Yet, of those reports, only (19%) (N = 10 088) were referred to substance abuse treatment as part of their service plan, indicating a large gap between those who need treatment and those who receive it. This finding is important given that parental SUD is consistently linked to poorer child outcomes. Amongst other variables, reports indicate that C/P with co‐occurring emotional disturbance were three times more likely to be referred to treatment for SUD as part of service plans. Additional research is needed regarding the characteristics that distinguish C/P who receive referrals for SUD treatment in substantiated cases of child maltreatment.     

A latent variable model for analyzing mixed longitudinal (k,l)-inflated count and ordinal responses

A random effects model for analyzing mixed longitudinal count and ordinal data is presented where the count response is inflated in two points (k and l) and an (k,l)-Inflated Power series distribution is used as its distribution. A full likelihood-based approach is used to obtain maximum likelihood estimates of parameters of the model. For data with non-ignorable missing values models with probit model for missing mechanism are used.The dependence between longitudinal sequences of responses and inflation parameters are investigated using a random effects approach. Also, to investigate the correlation between mixed ordinal and count responses of each individuals at each time, a shared random effect is used. In order to assess the performance of the model, a simulation study is performed for a case that the count response has (k,l)-Inflated Binomial distribution. Performance comparisons of count-ordinal random effect model, Zero-Inflated ordinal random effects model and (k,l)-Inflated ordinal random effects model are also given. The model is applied to a real social data set from the first two waves of the national longitudinal study of adolescent to adult health (Add Health study). In this data set, the joint responses are the number of days in a month that each individual smoked as the count response and the general health condition of each individual as the ordinal response. For the count response there is incidence of excess values of 0 and 30.     

Bayesian Estimation and Model Choice in Item Response Models

Item response models are essential tools for analyzing results from many educational and psychological tests. Such models are used to quantify the probability of correct response as a function of unobserved examinee ability and other parameters explaining the difficulty and the discriminatory power of the questions in the test. Some of these models also incorporate a threshold parameter for the probability of the correct response to account for the effect of guessing the correct answer in multiple choice type tests. In this article we consider fitting of such models using the Gibbs sampler. A data augmentation method to analyze a normal-ogive model incorporating a threshold guessing parameter is introduced and compared with a Metropolis-Hastings sampling method. The proposed method is an order of magnitude more efficient than the existing method. Another objective of this paper is to develop Bayesian model choice techniques for model discrimination. A predictive approach based on a variant of the Bayes factor is used and compared with another decision theoretic method which minimizes an expected loss function on the predictive space. A classical model choice technique based on a modified likelihood ratio test statistic is shown as one component of the second criterion. As a consequence the Bayesian methods proposed in this paper are contrasted with the classical approach based on the likelihood ratio test. Several examples are given to illustrate the methods.     

Efficiency measures of the Chinese commercial banking system using an additive two-stage DEA

Measuring and improving the efficiency of the Chinese commercial banking system has recently attracted increasing interest. Few studies, however, have adopted the two-stage network DEA to explore this issue in the Chinese context. Because the entire operational process of the banking system could be divided into two sub-processes (deposit producing and profit earning), the evaluation of the sub-process efficiencies could be used to assist in identifying the sources of the inefficiency of the entire banking system. In this study, we utilize the network DEA approach to disaggregate, evaluate and test the efficiencies of 16 major Chinese commercial banks during the third round of the Chinese banking reform period (2003–2011) with the variable returns to scale setting and the consideration of undesirable/bad output. The main findings of this study are as follows: (i) the two-stage DEA model is more effective than the conventional black box DEA model in identifying the inefficiency of banking system, and the inefficiency of the Chinese banking system primarily results from the inefficiency of its deposit producing sub-process; (ii) the overall efficiency of the Chinese banking system improves over the study period because of the reform; (iii) the state-owned commercial banks (SOBs) appear to be more overall efficient than the joint-stock commercial banks (JSBs) only in the pre-reform period, and the efficiency difference between the SOBs and the JSBs is reduced over the post-reform period; (iv) the disposal of non-performing loans (NPLs) from the Chinese banking system in general explains its efficiency improvement, and the joint-equity reform of the SOBs specifically increases their efficiencies.     

Improved approaches to interval estimation of effective doses for a logistic dose-response curve

Asymptotic confidence (delta) intervals and intervals based upon the use of Fieller's theorem are alternative methods for constructing intervals for the <$>\gamma<$>% effective doses (ED<$>_\gamma<$>). Sitter and Wu (1993) provided a comparison of the two approaches for the ED<$>_{50}<$>, for the case in which a logistic dose response curve is assumed. They showed that the Fieller intervals are generally superior. In this paper, we introduce two new families of intervals, both of which include the delta and Fieller intervals as special cases. In addition we consider interval estimation of the ED<$>_{90}<$> as well as the ED<$>_{50}<$>. We provide a comparison of the various methods for the problem of constructing a confidence interval for the ED<$>_\gamma<$>.     

Integrated framework for robustness analysis using ratio-based efficiency model with application to evaluation of Polish airports

We consider a problem of evaluating efficiency of Decision Making Units (DMUs) based on their deterministic performance on multiple consumed inputs and multiple produced outputs. We apply a ratio-based efficiency measure, and account for the Decision Maker׳s preference information representable with linear constraints involving input/output weights. We analyze the set of all feasible weights to answer various robustness concerns by deriving: (1) extreme efficiency scores and (2) extreme efficiency ranks for each DMU, (3) possible and necessary efficiency preference relations for pairs of DMUs, (4) efficiency distribution, (5) efficiency rank acceptability indices, and (6) pairwise efficiency outranking indices. The proposed hybrid approach combines and extends previous results from Ratio-based Efficiency Analysis and the SMAA-D method. The practical managerial implications are derived from the complementary character of accounted perspectives on DMUs׳ efficiencies. We present an innovative open-source software implementing an integrated framework for robustness analysis using a ratio-based efficiency model on the diviz platform. The proposed approach is applied to a real-world problem of evaluating efficiency of Polish airports. We consider four inputs related to the capacities of a terminal, runways, and an apron, and to the airport׳s catchment area, and two outputs concerning passenger traffic and number of aircraft movements. We present how the results can be affected by integrating the weight constraints and eliminating outlier DMUs.     

The role of titles in enhancing data visualization

Many in the data visualization and evaluation communities recommend conveying the message or takeaway of the visualization in the visualization's title. This study tested that recommendation by examining how informative or generic titles impact a visualization’s visual efficiency, aesthetics, credibility, and the perceived effectiveness of the hypothetical program examined. Furthermore, this study tested how simple or complex graphs, and positive, negative, or mixed results (i.e., valence of the results) affected outcomes. Participants were randomly assigned to one of 12 conditions, representing a 2 (graph: simple or complex) x 2 (title: generic or informative) x 3 (valence: positive, negative, mixed) between-subjects study. The results indicated that informative titles required less mental effort and were viewed as more aesthetically pleasing, but otherwise did not lead to greater accuracy, credibility, or perceived effectiveness. Furthermore, titles did not interact with graph type or the valence of the findings. While the results suggest it is worthwhile to consider adding an informative title to data visualizations as they can reduce mental effort for the viewer, the intended goal of the visualization should be taken into consideration. Considering the goal of the visualization can be a deciding factor of the type of graph and title that will best serve its intended purposes. Overall, this suggests that data visualization recommendations that impact evaluation reporting practices should be scrutinized more closely through research.     

Evaluation of bank branch growth potential using data envelopment analysis

Banks occasionally employ frontier efficiency analyses to objectively identify best practices within their organizations. Amongst such methods, Data Envelopment Analysis (DEA) was found to be one of the leading approaches. DEA has been successfully applied in many bank branch performance evaluations using traditional intermediation, profitability and production approaches. However, there has been little focus on assessing the growth potential of individual branches.This research presents five models that examine three perspectives of branch growth. Each model was applied to the branch network of one of Canada׳s top five banks to gauge the growth potential of individual branches and to provide tailored improvement recommendations. Using various analysis methodologies, the results of each model were examined and their functionality assessed.