疲劳裂纹扩展试验裂纹图像采集系统

针对目前金属疲劳裂纹扩展检测方法存在效率低、操作繁琐、精度不高，不能实现实时性等缺点，文章提出了基 于机器视觉的裂纹检测方法。根据金属疲劳裂纹扩展试验过程中裂纹图像的采集要求，设计了摄像头位置可自动调整 的疲劳裂纹图像采集系统，包括摄像头安装运动装置，裂纹图像采集装置以及摄像头运动控制系统。图像采集装置由高 分辨率黑白面阵CCD摄像头、光学镜头，光源照明装置和图像采集卡组成，前3者安装在摄像头支架上，与摄像头运动 装置相连。摄像头运动装置中的X，Y，，Z轴运动机构由步进电机带动滚珠导轨机构。在基于ARM技术的运动控制系统 的控制下摄像头可沿X，Y，，Z轴作高精度直线运动，实现和试件之间精确位置的调整。实验结果表明，所设计的系统可 采集到疲劳裂纹扩展试验过程中高清晰度、高分辨率的试件裂纹图像，满足下一步裂绞尺寸计算的要求；摄像头运动定 位精度可达到0. 02 mm，满足精确的系统聚焦、位置调整、跟踪采集的要求。     

土地利用管制制度效率探讨

对于公共管理,管制是重要的管理手段。文章用经济学的观点阐述管制政策的效率原理,并在此基础上分析我国土地利用管制政策的效率,最后提出我国管制政策改进的建议和实施的条件。     

身体素质与跳远技术教学模型建立初探

用数学量化的方法 ,分析处理有关数据 ,建构模型。利用模型指导教师在跳远教学中如何处理素质与技术的关系 ,从而使跳远教学具有较科学、量化的评价体系和理论依据。     

一类带有分布参数系统的最佳控制

本文给出一类非均匀弦的横向振动的最佳控制，推广了P C Park的结果。这一结果同样适用于同类型振动问题。     

一个汉英机器翻译系统中的语义处理模型

简略阐述了三种语义分析理论 -配价语法 ,格语法 ,论旨理论后 ,重点介绍了机器翻译系统所采用的语义模型     

开放式数控切割机神经网络误差补偿研究

分析了影响数控火焰切割机加工精度的主要因素,利用开放式数控系统的软件开放性,提出了采用IGCAQBP学习算法的神经网络方法来对包括金属热变形、机械传动误差等非线性因素在内的多种因素造成的加工误差进行误差补偿,设计了嵌入开放式数控系统中的神经网络误差补偿器,给出了实用的补偿器使用方法,并对误差补偿功能进行了扩展,仿真结果和实际应用表明该方法稳定有效。     

高速SDRAM控制器设计的FPGA实现

同步动态存储器(SDRAM)控制器通常用有限状态机实现,对于一般的设计方法,由于状态数量多,状态转换通常伴随大的组合逻辑而影响运行速度,因此,SDRAM控制器的速度限制了SDRAM存储器的访问速度。该文从结构优化入手来优化方法,利用状态机分解的思想将大型SDRAM控制状态机用若干小的子状态机实现,达到简化逻辑的目的,不仅提高了速度还节省了资源,对该类大型SDRAM控制器的实现有一定参考意义。     

Empirical Non-Parametric Control Charts: Estimation Effects and Corrections

Owing to the extreme quantiles involved, standard control charts are very sensitive to the effects of parameter estimation and non-normality. More general parametric charts have been devised to deal with the latter complication and corrections have been derived to compensate for the estimation step, both under normal and parametric models. The resulting procedures offer a satisfactory solution over a broad range of underlying distributions. However, situations do occur where even such a large model is inadequate and nothing remains but to consider non- parametric charts. In principle, these form ideal solutions, but the problem is that huge sample sizes are required for the estimation step. Otherwise the resulting stochastic error is so large that the chart is very unstable, a disadvantage that seems to outweigh the advantage of avoiding the model error from the parametric case. Here we analyse under what conditions non-parametric charts actually become feasible alternatives for their parametric counterparts. In particular, corrected versions are suggested for which a possible change point is reached at sample sizes that are markedly less huge (but still larger than the customary range). These corrections serve to control the behaviour during in-control (markedly wrong outcomes of the estimates only occur sufficiently rarely). The price for this protection will clearly be some loss of detection power during out-of-control. A change point comes in view as soon as this loss can be made sufficiently small.     

工程建设项目投资控制

论述投资控制的关键环节,提出投资控制工作的实施要点,阐明投资控制工作的必要性、可行性和重大意义.     

Some remarks on the physical models concerning two different approaches to inference in statistical process control

Summary For technological applications it can be useful to identify some simple physical mechanisms, which, on the basis of the available knowledge of the production process, may suggest the most appropriate approach to statistical control of the random quantities of interest. For this purpose the notion of rupture point is introduced firstly. A rupture point is characterized bym randomly arising out of control states, assumed to be mutually exclusive and stochastically independent. Shewhart's control charts seem to represent the natural statistical tool for controlling a rupture point; however it is shown that they are fully justified only when the hazard rates attached to the causes of failure are constant. Otherwise, typically in the presence of time increasing hazard rates, Shewhart's control charts should be completed by a preventive intervention rule (preventive maintenance). In the second place, the notion of dynamic instability point is introduced, which is specifically characterized by assuming that the random quantity of interest is ruled by a stochastic differential equation with constant coefficients. By discretization, developed according to a possibly new approach, it is shown that the former model reduces to an equation error model, which is among the simplest used in adaptive control, and thus particularly easy to deal with in regard to parameter estimation and the definition of the optimum control rule.