Simulating the average run length for cusum schemes using variance reduction techniques

Some variance reduction techniques utilizing the total hazard are developed to estimate the average run lengths of the cumulative sum charts through simulation when the process follows a general probability distribution. Particularly, we propose the hazard estimator and the cycle estimator. Simulation results are shown for the exponential case and these estimators are compared with the raw simulation estimator. Applicability to multivariate CUSUM schemes is briefly discussed in the conclusion.     

CUSUM chart for detecting range shifts when monotonicity of likelihood ratio is invalid

It is often encountered in the literature that the log-likelihood ratios (LLR) of some distributions (e.g. the student t distribution) are not monotonic. Existing charts for monitoring such processes may suffer from the fact that the average run length (ARL) curve is a discontinuous function of control limit. It implies that some pre-specified in-control (IC) ARLs of these charts may not be reached. To guarantee the false alarm rate of a control chart lower than the nominal level, a larger IC ARL is usually suggested in the literature. However, the large IC ARL may weaken the performance of a control chart when the process is out-of-control (OC), compared with a just right IC ARL. To overcome it, we adjust the LLR to be a monotonic one in this paper. Based on it, a multiple CUSUM chart is developed to detect range shifts in IC distribution. Theoretical result in this paper ensures the continuity of its ARL curve. Numerical results show our proposed chart performs well under the range shifts, especially under the large shifts. In the end, a real data example is utilized to illustrate our proposed chart.     

基于FPGA的生命探测仪算法研究与系统设计

给出了一种基于FPGA的生命探测信号处理系统的设计方法。从理论上研究了生命探测仪的算法及其软硬件系统。其中在FPGA软件设计中利用模块化的思想方法分别设计了FIR滤波器、异,~FIFO、UART．电池监控、功能控制等功能模块。最后完成人体特征信号和体动信号的分析与提取，实现了非接触情况下生命探测与发现。相对于传统的生命探测仪，该设备具有体积小，功耗低，操作简单，携带方便等优点，特别适用于野外和战场生命探测等应用场合。     

Conditional design of the CUSUM median chart for the process position when process parameters are unknown

In practice, different practitioners will use different Phase I samples to estimate the process parameters, which will lead to different Phase II control chart's performance. Researches refer to this variability as between-practitioners-variability of control charts. Since between-practitioners-variability is important in the design of the CUSUM median chart with estimated process parameters, the standard deviation of average run length (SDARL) will be used to study its properties. It is shown that the CUSUM median chart requires a larger amount of Phase I samples to sufficiently reduce the variation in the in-control ARL of the CUSUM median chart. Considering the limitation of the amount of the Phase I samples, a bootstrap approach is also used here to adjust the control limits of the CUSUM median chart. Comparisons are made for the CUSUM and Shewhart median charts with estimated parameters when using the adjusted- and unadjusted control limits and some conclusions are made.     

Continuous single attribute control chart for Markov-dependent processes

Most of the times, the observations related to the quality characteristic of a process do not need to be independent. In such cases, control charts based on the assumption of independence of the observations are not appropriate. When the characteristic under study is qualitative, Markov model serves as a simple model to account for the dependency of the observations. For this purpose, we develop an attribute control chart under 100% inspection for a Markov dependent process by controlling the error probabilities. This chart consists of two sub-charts. For a given sample, depending upon the state of the last observation of previous sample (if any), one of these two will be used. Optimal values of the design parameters of the control chart are obtained. Chart’s performance is studied by using its capability (probability) of detecting a shift in process parameters.     

A binomial CUSUM chart for detecting large shifts in fraction nonconforming

This article studies a unique feature of the binomial CUSUM chart in which the difference (d _t ?d ₀) is replaced by (d _t ?d ₀)² in the formulation of the cumulative sum C _t (where d _t and d ₀ are the actual and in-control numbers of nonconforming units, respectively, in a sample). Performance studies are reported and the results reveal that this new feature is able to increase the detection effectiveness when fraction nonconforming p becomes three to four times as large as the in-control value p ₀. The design of the new binomial CUSUM chart is presented along with the calculation of the in-control and out-of-control Average Run Lengths (ARL₀ and ARL₁).     

Robust multivariate change point analysis based on data depth

Modern methods for detecting changes in the scale or covariance of multivariate distributions rely primarily on testing for the constancy of the covariance matrix. These depend on higher-order moment conditions, and also do not work well when the dimension of the data is large or even moderate relative to the sample size. In this paper, we propose a nonparametric change point test for multivariate data using rankings obtained from data depth measures. As the data depth of an observation measures its centrality relative to the sample, changes in data depth may signify a change of scale of the underlying distribution, and the proposed test is particularly responsive to detecting such changes. We provide a full asymptotic theory for the proposed test statistic under the null hypothesis that the observations are stable, and natural conditions under which the test is consistent. The finite sample properties are investigated by means of a Monte Carlo simulation, and these along with the theoretical results confirm that the test is robust to heavy tails, skewness and high dimensionality. The proposed methods are demonstrated with an application to structural break detection in the rate of change of pollutants linked to acid rain measured in Turkey lake, a lake in central Ontario, Canada. Our test suggests a change in the rate of acid rain in the late 1980s/early 1990s, which coincides with clean air legislation in Canada and the US. The Canadian Journal of Statistics 48: 417–446; 2020 © 2020 Statistical Society of Canada     

一类混沌经济模型的控制方法的研究

就经济系统中的一类多参数混沌模型 ,应用微分动力学理论 ,研究了变参数结构反馈控制方法 ,成功地进行了多参数混沌控制 .并讨论小波滤波法 ,成功实现了混沌不稳定周期轨道的稳定控制方法 ,并以具体的财产管理混沌模型为例验证所提出的方法     

The CUSUM Test for Detecting Structural Changes in Strong Mixing Processes

Strong mixing property holds for a broad class of linear and nonlinear time series models such as Auto-Regressive Moving Average Processes and Generalized Auto-Regressive Conditional Heteroscedasticity Processes models. In this article, we study correlation structure of strong mixing sequences, and some asymptotic properties are presented. We also present a new method for detecting change point in correlation structure of strong mixing sequences, and present a nonparametric sequential analysis for detecting changes named cumulative sum test statistic for this. Asymptotic consistency of this test statistics is shown. This method is applied to simulated data of some linear and nonlinear models and power of the test is evaluated. For linear models, it is shown that this method has a better performance in comparison to Berkes et al. (2009 Berkes, I., Gombay, E., Horvath, L. (2009). Testing for changes in the covariance structure of linear processes. J. Stat. Plan. Inf. 139:2044–2063.[Crossref], [Web of Science ®] , [Google Scholar]).     

ON THE ECONOMIC DESIGN OF MULTIVARIATE CONTROL CHARTS

ABSTRACT

It is an increasingly common practice to monitor several related quality characteristics of a product or process using a multivariate control chart procedure. Several types of multivariate control charts, including Hotelling's χ ² and T ² control charts, have been developed in attempts to improve monitoring by using the correlation structure that exists between quality characteristics. The purpose of this paper is to summarize the assumptions made regarding the out-of-control process shift in the economic design of multivariate control charts and to address their consequences. We study the average run length (ARL) properties of the χ ² control chart using a numerical example and show that this chart can perform ineffectively under the assumed out-of-control conditions when designed using the economic approach. Following Healy,[1] Healy, J.D. 1987. A Note on the Multivariate CUSUM Procedures. Technometrics, 29: 409–412. [Taylor & Francis Online], [Web of Science ®] , [Google Scholar] we offer an alternative procedure that has improved ARL properties and overall performance. These results can be important to researchers and practitioners who are interested in using the economic design of multivariate control procedures.