Modelling mass-size particle data by finite mixtures

A minimum distance procedure, analogous to maximum likelihood for multinomial data, is employed to fit mixture models to mass-size relative frequencies recorded for some clay soils of southeastern Australia. Log hyperbolic component distributions are considered initially and it is shown how they can be fitted satisfactorily at least to ungrouped data using a generalized EM algorithm. A computationally more convenient model with log skew Laplace components is subsequently shown to suffice. It is demonstrated how it can be fitted to the data in their original grouped form. Consideration is given also to the provision of standard errors using the idea of a quasi-sample size.     

ON THE LIKELIHOOD RATIO TEST FOR A SINGLE MODEL AGAINST THE MIXTURE OF TWO KNOWN DENSITIES

In this paper, we consider the likelihood ratio test for a single model against the mixture of two known densities. We research the accuracy of the limiting null distribution obtained by Titterington 1-2 Titterington, D. M. 1981. Contribution to the discussion of paper by M. Aitkin, D. Amderson and J. Hinde, J. R.. Statist. Soc. A, 144: 459 Titterington, D. M., Smith, A. F.M. and Makov, U. E. 1985. Statistical Analysis of Finite Mixture Distribution New York: Wiley.  .After that, we improve the limiting null distribution and confirm its usefulness by the simulation study.     

Nearly optimal orthogonally blocked desings for a quadratic mixture model with q components

In experiments with mixtures involving process variables, orthogonal block designs may be used to allow estimation of the parameters of the mixture components independently of estimation of the parameters of the process variables. In the class of orthogonally blocked designs based on pairs of suitably chosen Latin squares, the optimal designs consist primarily of binary blends of the mixture components, regardless of how many ingredients are available for the mixture. This paper considers ways of modifying these optimal designs so that some or all of the runs used in the experiment include a minimum proportion of each mixture ingredient. The designs considered are nearly optimal in the sense that the experimental points are chosen to follow ridges of maxima in the optimality criteria. Specific designs are discussed for mixtures involving three and four components and distinctions are identified for different designs with the same optimality properties. The ideas presented for these specific designs are readily extended to mixtures with q>4 components.     

Full Bayesian Significance Test for Zero-Inflated Distributions

ABSTRACT

In this article we propose a new Kolmogorov-Smirnov type test for testing the nonlinearity of time series, based on the one which was originally introduced by An and Cheng. Our simulation study shows that the suggested test performs better than the original test. An associated bootstrap test is also found to outperform remarkably the non-bootstrap test.     

Optimum Mixture Design Using Deficiency Criterion

In a mixture experiment the measured response is assumed to depend only on the relative proportion of ingredients or components present in the mixture. Scheffe (1958 Scheffe , H. ( 1958 ). Experiments with mixtures . J. R. Statist. Soc. B 20 : 344 – 360 . [Google Scholar], 1963 Scheffe , H. ( 1963 ). Simplex – centroid design for experiments with mixtures . J. R. Statist. Soc. B 25 : 235 – 263 . [Google Scholar]) first systematically considered this problem and introduced different models and designs suitable in such situations. Optimum designs for the estimation of parameters of different mixture models are available in the literature. The problem of estimating the optimum proportion of mixture components is of great practical importance. Pal and Mandal (2006 Pal , M. , Mandal , N. K. ( 2006 ). Optimum designs for optimum mixtures . Statist. Probab. Lett. 76 ( 13 ): 1369 – 1379 .[Crossref], [Web of Science ®] , [Google Scholar], 2007 Pal , M. , Mandal , N. K. (2007). Optimum mixture design via equivalence theory. communicated. JCISS 32:107–126. [Google Scholar]) attempted to find a solution to this problem by adopting a pseudo-Bayesian approach and using the trace criterion. Subsequently, Pal and Mandal (2008 Pal , M. , Mandal , N. K. ( 2008 ). Minimax designs for optimum mixtures . To appear in Statist. Probab. Lett.  [Google Scholar]) solved the problem using minimax criterion. In this article, the deficiency criterion due to Chatterjee and Mandal (1981 Chatterjee , S. K. , Mandal , N. K. ( 1981 ). Response surface designs for estimating the optimal point . Calcutta Statist. Assoc. Bull. . 30 : 145 – 169 .[Crossref] , [Google Scholar]) has been used as a measure for comparing the performance of competing designs.     

Bayes Estimation of Change Point in Non Standard Mixture of Left-Truncated Exponential With Unknown Proportions

A sequence of independent lifetimes X ₁, X ₂,…, X _m , X _m+1,…, X _n were observed from the mixture of a degenerate and left-truncated exponential (LTE) distribution, with reliability R _1τ at time τ and minimum life length η with unknown proportion p ₁ and θ₁ but later it was found that there was a change in the system at some point of time m and it is reflected in the sequence after X _m by change in reliability R _2τ at time τ and unknown proportion p ₂ and θ₂. This distribution occurs in many practical situations, for instance; life of a unit may have a LTE distribution but some of the units fail instantaneously. Apart from mixture distributions, the phenomenon of change point is also observed in several situations in life testing and reliability estimation problems. It may happen that at some point of time instability in the sequence of failure times is observed. The problem of study is: When and where this change has started occurring. This is called change point inference problem. The estimators of m, R ₁(t ₀), R ₂(t ₀), p ₁, and p ₂ are derived under asymmetric loss functions namely Linex loss & general entropy loss functions. Both the non informative and informative prior are considered. The effects of prior consideration on Bayes estimates of change point are also studied.     

A Finite Mixture Three-Parameter Weibull Model for the Analysis of Wind Speed Data

This article presents a mixture three-parameter Weibull distribution to model wind speed data. The parameters are estimated by using maximum likelihood (ML) method in which the maximization problem is regarded as a nonlinear programming with only inequality constraints and is solved numerically by the interior-point method. By applying this model to four lattice-point wind speed sequences extracted from National Centers for Environmental Prediction (NCEP) reanalysis data, it is observed that the mixture three-parameter Weibull distribution model proposed in this paper provides a better fit than the existing Weibull models for the analysis of wind speed data under study.     

Size and Power of Recent Tests for Homogeneity in Exponential Mixtures

The article investigates diagnostic procedures for finite mixture models. The problem is to decide whether given data stem from an exponential distribution or a finite mixture of such distributions. Recently, three new test approaches have been proposed, the modified likelihood ratio test (MLRT) by Chen et al. (2001 Chen , H. , Chen , J. , Kalbfleisch , J. D. ( 2001 ). A modified likelihood ratio test for homogeneity in finite mixture models . Journal of the Royal Statistical Society, B 63 : 19 – 29 .[Crossref] , [Google Scholar]), the ADDS test by Mosler and Seidel (2001 Mosler , K. , Seidel , W. ( 2001 ). Testing for homogeneity in an exponential mixture model . Australian and New Zealand Journal of Statistics 43 : 231 – 247 . [Google Scholar]), and the D-test by Charnigo and Sun (2004 Charnigo , R. , Sun , J. ( 2004 ). Testing homogeneity in a mixture distribution via the l ² distance between competing models . Journal of the American Statistical Society 99 : 488 – 498 .[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]). The size and power of these tests are determined by Monte Carlo simulation and their relative merits are evaluated. We conclude that the ADDS test shows always not much less and under some alternatives, in particular lower contaminations, considerably more power than its competitors. Also, new tables for the ADDS test are provided.     

Selecting the precision parameter prior in Dirichlet process mixture models

We consider Dirichlet process mixture models in which the observed clusters in any particular dataset are not viewed as belonging to a finite set of possible clusters but rather as representatives of a latent structure in which objects belong to one of a potentially infinite number of clusters. As more information is revealed the number of inferred clusters is allowed to grow. The precision parameter of the Dirichlet process is a crucial parameter that controls the number of clusters. We develop a framework for the specification of the hyperparameters associated with the prior for the precision parameter that can be used both in the presence or absence of subjective prior information about the level of clustering. Our approach is illustrated in an analysis of clustering brands at the magazine Which?. The results are compared with the approach of Dorazio (2009) via a simulation study.     

An empirical investigation of different operating characteristics of several estimators of the intraclass correlation in the analysis of binary data

This paper is concerned with properties (bias, standard deviation, mean square error and efficiency) of twenty six estimators of the intraclass correlation in the analysis of binary data. Our main interest is to study these properties when data are generated from different distributions. For data generation we considered three over-dispersed binomial distributions, namely, the beta-binomial distribution, the probit normal binomial distribution and a mixture of two binomial distributions. The findings regarding bias, standard deviation and mean squared error of all these estimators, are that (a) in general, the distributions of biases of most of the estimators are negatively skewed. The biases are smallest when data are generated from the beta-binomial distribution and largest when data are generated from the mixture distribution; (b) the standard deviations are smallest when data are generated from the beta-binomial distribution; and (c) the mean squared errors are smallest when data are generated from the beta-binomial distribution and largest when data are generated from the mixture distribution. Of the 26, nine estimators including the maximum likelihood estimator, an estimator based on the optimal quadratic estimating equations of Crowder (1987), and an analysis of variance type estimator is found to have least amount of bias, standard deviation and mean squared error. Also, the distributions of the bias, standard deviation and mean squared error for each of these estimators are, in general, more symmetric than those of the other estimators. Our findings regarding efficiency are that the estimator based on the optimal quadratic estimating equations has consistently high efficiency and least variability in the efficiency results. In the important range in which the intraclass correlation is small (≤0 5), on the average, this estimator shows best efficiency performance. The analysis of variance type estimator seems to do well for larger values of the intraclass correlation. In general, the estimator based on the optimal quadratic estimating equations seems to show best efficiency performance for data from the beta-binomial distribution and the probit normal binomial distribution, and the analysis of variance type estimator seems to do well for data from the mixture distribution.