Comments on the Mixture Detection Rule Used in SPC Control Charts

When calculating independently the false alarm rate of the eight usual runs rules used in SPC control chart, it appears that the proposed rule designed to detect mixture patterns corresponds to a Type-I error strongly lower than the seven other rules. This discrepancy is underlined and the mixture rule is showed to be useless both for in-control and out-of-control processes. Thus a modification of the mixture detection rule is proposed and the impact of this new mixture rule is then illustrated and discussed using Monte Carlo calculations.     

A Multivariate Synthetic Control Chart for Monitoring Process Mean Vector

In this article, a multivariate synthetic control chart is developed for monitoring the mean vector of a normally distributed process. The proposed chart is a combination of the Hotelling's T ² chart and Conforming Run Length chart. The operation, design, and performance of the chart are described. Average run length comparisons between some other existing control charts and the synthetic T ² chart are presented. They indicate that the synthetic T ² chart outperforms Hotelling's T ² chart and T ² chart with supplementary runs rules.     

Optimal One-Way Random Effects Designs for the Intraclass Correlation Based on Confidence Intervals

ABSTRACT

Confidence intervals for the intraclass correlation coefficient (ρ) are used to determine the optimal allocation of experimental material in one-way random effects models. Designs that produce narrow intervals are preferred since they provide greater precision to estimate ρ. Assuming the total cost and the relative cost of the two stages of sampling are fixed, the authors investigate the number of classes and the number of individuals per class required to minimize the expected length of confidence intervals. We obtain results using asymptotic theory and compare these results to those obtained using exact calculations. The best design depends on the unknown value of ρ. Minimizing the maximum expected length of confidence intervals guards against worst-case scenarios. A good overall recommendation based on asymptotic results is to choose a design having classes of size 2 + √4 + 3r, where r is the relative cost of sampling at the class-level compared to the individual-level. If r = 0, then the overall cost is the sample size and the recommendation reduces to a design having classes of size 4.     

Estimation of Traffic Intensity Based on Queue Length in a Single M/M/1 Queue

In this article, maximum likelihood estimator (MLE) as well as Bayes estimator of traffic intensity (ρ) in an M/M/1/∞ queueing model in equilibrium based on number of customers present in the queue at successive departure epochs have been worked out. Estimates of some functions of ρ which provide measures of effectiveness of the queue have also been derived. A comprehensive simulation study starting with the transition probability matrix has been carried out in the last section.     

A New GWMA Control Chart for Monitoring Process Mean and Variability

In this article, we extend a single exponentially weighted moving average semicircle (EWMA-SC) chart to a single generally weighted moving average (GWMA) chart. This new control chart can effectively combine the features of the SC chart with GWMA techniques, and can easily indicate the source and direction of a change. We perform simulations to evaluate the average run length, standard deviation of the run length, and diagnostic abilities of the GWMA-SC and EWMA-SC charts. An extensive comparison shows that the GWMA-SC control chart is more sensitive than the EWMA-SC chart for detecting small shifts in the process mean and/or variability.     

An adaptive multivariate CUSUM control chart for signaling a range of location shifts

ABSTRACT

In this work, we proposed an adaptive multivariate cumulative sum (CUSUM) statistical process control chart for signaling a range of location shifts. This method was based on the multivariate CUSUM control chart proposed by Pignatiello and Runger (1990 Pignatiello, J.J., Runger, G.C. (1990). Comparisons of multivariate CUSUM charts. J. Qual. Technol. 22(3):173–186.[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]), but we adopted the adaptive approach similar to that discussed by Dai et al. (2011 Dai, Y., Luo, Y., Li, Z., Wang, Z. (2011). A new adaptive CUSUM control chart for detecting the multivariate process mean. Qual. Reliab. Eng. Int. 27(7):877–884.[Crossref], [Web of Science ®] , [Google Scholar]), which was based on a different CUSUM method introduced by Crosier (1988 Crosier, R.B. (1988). Multivariate generalizations of cumulative sum quality-control schemes. Technometrics 30(3):291–303.[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]). The reference value in this proposed procedure was changed adaptively in each run, with the current mean shift estimated by exponentially weighted moving average (EWMA) statistic. By specifying the minimal magnitude of the mean shift, our proposed control chart achieved a good overall performance for detecting a range of shifts rather than a single value. We compared our adaptive multivariate CUSUM method with that of Dai et al. (2001 Dai, Y., Luo, Y., Li, Z., Wang, Z. (2011). A new adaptive CUSUM control chart for detecting the multivariate process mean. Qual. Reliab. Eng. Int. 27(7):877–884.[Crossref], [Web of Science ®] , [Google Scholar]) and the non adaptive versions of these two methods, by evaluating both the steady state and zero state average run length (ARL) values. The detection efficiency of our method showed improvements over the comparative methods when the location shift is unknown but falls within an expected range.     

Evaluation of control charts under linear trend

The performance of several control charting schemes is studied when the process mean changes as a linear trend. The control charts considered include the Shewhart chart, the Shewhart chart supplemented with runs rules, the cumulative sum (CUSUM) chart, the exponentially weighted moving average (EWMA) chart, and a generalized control chart.     

A review of statistical process control techniques for short run manufacturing systems

Because manufacturing lot sizes continue to shrink, statistical process control methods for short production runs are increasingly important. We review and comment on the assumptions, advantages and disadvantages of alternatives, Traditional methods well as more recent developments are described and contrasted.     

Asymptotics of the run lengths of two control charts

The CUSUM control chart proposed by Page is a widely used in monitoring the quality of manufacturing processes. The Shiryayev-Roberts (S-R) control chart due to Shiryayev (1963) and Roberts (1988) is one of its competitors, This paper is concerned with the distribution properties of the run lengths of these two control charts. In context of continuous time, we first give the expansions of the higher moments of these run lengths. Then, we show that the asymptotic distributions of these run lengths are either some exponential distributions, or the distribution of the suprema of a standard Brownian motion, or some normal distributions, according to whether the μ<δ/2,μ =δ/2 and μ>δ/2. Here δ is the reference value of the above charts. Some similar results are also obtained in the context of discrete time.     

Improving the performance of the zone control chart

A general model for the zone control chart is presented. Using this model, it is shown that there are score vectors for zone control charts which result in superior average run length performance in comparison to Shewhart charts with common runs rules.

A fast initial response (FIR) feature for the zone control chart is also proposed. Average run lengths of the zone control chart with this feature are calculated. It is shown that the FIR feature improves zone control chart performance by providing significantly earlier signals when the process is out of control.