Translating cross-lagged effects into incidence rates and risk ratios: The case of psychosocial safety climate and depression

Longitudinal studies are the gold standard of empirical work and stress research whenever experiments are not plausible. Frequently, scales are used to assess risk factors and their consequences, and cross-lagged effects are estimated to determine possible risks. Methods to translate cross-lagged effects into risk ratios to facilitate risk assessment do not yet exist, which creates a divide between psychological and epidemiological work stress research. The aim of the present paper is to demonstrate how cross-lagged effects can be used to assess the risk ratio of different levels of psychosocial safety climate (PSC) in organisations, an important psychosocial risk for the development of depression. We used available longitudinal evidence from the Australian Workplace Barometer (N?=?1905) to estimate cross-lagged effects of PSC on depression. We applied continuous time modelling to obtain time-scalable cross effects. These were further investigated in a 4-year Monte Carlo simulation, which translated them into 4-year incident rates. Incident rates were determined by relying on clinically relevant 2-year periods of depression. We suggest a critical value of PSC?=?26 (corresponding to ?1.4 SD), which is indicative of more than 100% increased incidents of persistent depressive disorder in 4-year periods compared to average levels of PSC across 4 years.     

Properties of the weighted log‐rank test in the design of confirmatory studies with delayed effects

Proportional hazards are a common assumption when designing confirmatory clinical trials in oncology. This assumption not only affects the analysis part but also the sample size calculation. The presence of delayed effects causes a change in the hazard ratio while the trial is ongoing since at the beginning we do not observe any difference between treatment arms, and after some unknown time point, the differences between treatment arms will start to appear. Hence, the proportional hazards assumption no longer holds, and both sample size calculation and analysis methods to be used should be reconsidered. The weighted log‐rank test allows a weighting for early, middle, and late differences through the Fleming and Harrington class of weights and is proven to be more efficient when the proportional hazards assumption does not hold. The Fleming and Harrington class of weights, along with the estimated delay, can be incorporated into the sample size calculation in order to maintain the desired power once the treatment arm differences start to appear. In this article, we explore the impact of delayed effects in group sequential and adaptive group sequential designs and make an empirical evaluation in terms of power and type‐I error rate of the of the weighted log‐rank test in a simulated scenario with fixed values of the Fleming and Harrington class of weights. We also give some practical recommendations regarding which methodology should be used in the presence of delayed effects depending on certain characteristics of the trial.     

大数据背景下基于社交网络的聚类随机游走抽样算法研究

数字经济时代,社交网络作为数字化平台经济的重要载体,受到了国内外学者的广泛关注。大数据背景下,社交网络的商业应用价值巨大,但由于其网络规模空前庞大,传统的网络分析方法 因计算成本过高而不再适用。而通过网络抽样算法获取样本网络,再推断整体网络,可节约计算资源, 因此抽样算法的好坏将直接影响社交网络分析结论的准确性。现有社交网络抽样算法存在忽略网络内部拓扑结构、容易陷入局部网络、抽样效率过低等缺陷。为了弥补现有社交网络抽样算法的缺陷,本文结合大数据社交网络的社区特征,提出了一种聚类随机游走抽样算法。该方法首先使用社区聚类算法将原始网络节点进行社区划分,得到多个社区网络,然后分别对每个社区进行随机游走抽样获取样本网 络。数值模拟和案例应用的结果均表明,聚类随机游走抽样算法克服了传统网络抽样算法的缺点,能够在降低网络规模的同时较好地保留原始网络的结构特征。此外,该抽样算法还可以并行运算,有效提升抽样效率,对于大数据背景下大规模社交网络的抽样实践具有重大现实意义。     

Using local linear kernel smoothers to test the lack of fit of nonlinear regression models

Herein, we propose a data-driven test that assesses the lack of fit of nonlinear regression models. The comparison of local linear kernel and parametric fits is the basis of this test, and specific boundary-corrected kernels are not needed at the boundary when local linear fitting is used. Under the parametric null model, the asymptotically optimal bandwidth can be used for bandwidth selection. This selection method leads to the data-driven test that has a limiting normal distribution under the null hypothesis and is consistent against any fixed alternative. The finite-sample property of the proposed data-driven test is illustrated, and the power of the test is compared with that of some existing tests via simulation studies. We illustrate the practicality of the proposed test by using two data sets.     

Still-births among the offspring of male radiation workers at the Sellafield nuclear reprocessing plant: detailed results and statistical aspects

Summary. This study investigates whether there was evidence of increasing risk of still-birth with increasing paternal exposure to ionizing radiation received during employment at the Sellafield nuclear installation before the child was conceived. A significant positive association is found between the total paternal preconceptional exposure to external ionizing radiation and the risk of still-birth (after adjustment for year of birth, social class, birth order and paternal age, odds ratio at 100 mSv 1.24 (95% confidence interval 1.04–1.45)). A summary of the principal scientific findings of this study has been published in the Lancet . This paper describes in detail the statistical methods that were used in the investigation and presents the results in full.     

Measuring agreement between two statistics with applications to age standardization

Summary.  We detail a general method for measuring agreement between two statistics. An application is two ratios of directly standardized rates which differ only by the choice of the standard. If the statistics have a high value for the coefficient of agreement then the expected squared difference between the statistics is small relative to the variance of the average of the two statistics, and inferences vary little by changing statistics. The estimation of a coefficient of agreement between two statistics is not straightforward because there is only one pair of observed values, each statistic calculated from the data. We introduce estimators of the coefficient of agreement for two statistics and discuss their use, especially as applied to functions of standardized rates.     

运动元记忆训练对元记忆水平和动作记忆的影响

通过2个月的运动元记忆训练,检验其对非体育专业学生元记忆水平和动作记忆成绩的影响.结果显示运动元记忆训练能显著提高大学生运动记忆策略和记忆监控水平;结果还表明训练能明显提高大学生的艺术体操和健美操动作记忆成绩(表现在动作数量上),而且艺术体操动作记忆的训练效应大于健美操.     

Type I error rates from likelihood‐based repeated measures analyses of incomplete longitudinal data

The last observation carried forward (LOCF) approach is commonly utilized to handle missing values in the primary analysis of clinical trials. However, recent evidence suggests that likelihood‐based analyses developed under the missing at random (MAR) framework are sensible alternatives. The objective of this study was to assess the Type I error rates from a likelihood‐based MAR approach – mixed‐model repeated measures (MMRM) – compared with LOCF when estimating treatment contrasts for mean change from baseline to endpoint (Δ). Data emulating neuropsychiatric clinical trials were simulated in a 4 × 4 factorial arrangement of scenarios, using four patterns of mean changes over time and four strategies for deleting data to generate subject dropout via an MAR mechanism. In data with no dropout, estimates of Δ and SE_Δ from MMRM and LOCF were identical. In data with dropout, the Type I error rates (averaged across all scenarios) for MMRM and LOCF were 5.49% and 16.76%, respectively. In 11 of the 16 scenarios, the Type I error rate from MMRM was at least 1.00% closer to the expected rate of 5.00% than the corresponding rate from LOCF. In no scenario did LOCF yield a Type I error rate that was at least 1.00% closer to the expected rate than the corresponding rate from MMRM. The average estimate of SE_Δ from MMRM was greater in data with dropout than in complete data, whereas the average estimate of SE_Δ from LOCF was smaller in data with dropout than in complete data, suggesting that standard errors from MMRM better reflected the uncertainty in the data. The results from this investigation support those from previous studies, which found that MMRM provided reasonable control of Type I error even in the presence of MNAR missingness. No universally best approach to analysis of longitudinal data exists. However, likelihood‐based MAR approaches have been shown to perform well in a variety of situations and are a sensible alternative to the LOCF approach. MNAR methods can be used within a sensitivity analysis framework to test the potential presence and impact of MNAR data, thereby assessing robustness of results from an MAR method. Copyright © 2004 John Wiley & Sons, Ltd.     

Efficient designs based on orthogonal arrays of type I and type II for experiments using units ordered over time or space

For a wide variety of applications, experiments are based on units ordered over time or space. Models for these experiments generally may include one or more of: correlations, systematic trends, carryover effects and interference effects. Since the standard optimal block designs may not be efficient in these situations, orthogonal arrays of type I and type II, which were introduced in 1961 by C.R. Rao [Combinatorial arrangements analogous to orthogonal arrays, Sankhya A 23 (1961) 283–286], have been recently used to construct optimal and efficient designs for many of these experiments. Results in this area are unified and the salient features are outlined.     

Robustness of a Class of Partial Diallel Cross Designs to the Unavailability of a Complete Block of Observations

Complete and partial diallel cross designs are examined as to their construction and robustness against the loss of a block of observations. A simple generalized inverse is found for the information matrix of the line effects, which allows evaluation of expressions for the variances of the line-effect differences with and without the missing block. A-efficiencies, based on average variances of the elementary contrasts of the line-effects, suggest that these designs are fairly robust. The loss of efficiency is generally less than 10%, but it is shown that specific comparisons might suffer a loss of efficiency of as much as 40%.