The performance of multivariate CUSUM control charts with estimated parameters

In this paper, we study the effect of estimating the vector of means and the variance–covariance matrix on the performance of two of the most widely used multivariate cumulative sum (CUSUM) control charts, the MCUSUM chart proposed by Crosier [Multivariate generalizations of cumulative sum quality-control schemes, Technometrics 30 (1988), pp. 291–303] and the MC1 chart proposed by Pignatiello and Runger [Comparisons of multivariate CUSUM charts, J. Qual. Technol. 22 (1990), pp. 173–186]. Using simulation, we investigate and compare the in-control and out-of-control performances of the competing charts in terms of the average run length measure. The in-control and out-of-control performances of the competing charts deteriorate significantly if the estimated parameters are used with control limits intended for known parameters, especially when only a few Phase I samples are used to estimate the parameters. We recommend the use of the MC1 chart over that of the MCUSUM chart if the parameters are estimated from a small number of Phase I samples.     

Developing a variables repetitive group sampling plan based on process capability index C pk with unknown mean and variance

In this paper, variables repetitive group sampling plans are developed based on the process capability index C _pk when the quality characteristic follows a normal distribution with unknown mean and variance. The sampling plan parameters such as the sample size and the acceptance constant are determined to minimize the average sample number. Symmetric and asymmetric cases, in percent defectives due to two specification limits, are dealt with for specified combinations of acceptable quality level and limiting quality level. Tables are provided and examples are given to use proposed plans in practice.     

On constructing T 2 control charts for retrospective examination

In this paper we consider the issue of constructing retrospective T ² control chart limits so as to control the overall probability of a false alarm at a specified value. We describe an exact method for constructing the control limits for retrospective examination. We then consider Bonferroni-adjustments to Alt's control limit and to the standard x ² control limit as alternatives to the exact limit since it is computationally cumbersome to find the exact limit. We present the results of some simulation experiments that are carried out to compare the performance of these control limits. The results indicate that the Bonferroni-adjusted Alt's control limit performs better that the Bonferroni-adjusted x ² control limit. Furthermore, it appears that the Bonferroni-adjusted Alt's control limit is more than adequate for controlling the overall false alarm probability at a specified value.     

Zone control charts with estimated parameters for detecting prespecified changes in linear profiles

ABSTRACT

In profile monitoring, control charts are proposed to detect unanticipated changes, and it is usually assumed that the in-control parameters are known. However, due to the characteristics of a system or process, the prespecified changes would appear in the process. Moreover, in most applications, the in-control parameters are usually unknown. To overcome these issues, we develop the zone control charts with estimated parameters to detect small shifts of these prespecified changes. The effects of estimation error have been investigated on the performance of the proposed charts. To account for the practitioner-to-practitioner variability, the expected average run length (ARL) and the standard deviation of the average run length (SDARL) is used as the performance metrics. Our results show that the estimation error results in the significant variation in the ARL distribution. Furthermore, in order to adequately reduce the variability, more phase I samples are required in terms of the SDARL metric than that in terms of the expected ARL metric. In addition, more observations on each sampled profile are suggested to improve the charts' performance, especially for small phase I sample sizes. Finally, an illustrative example is given to show the performance of the proposed zone control charts.     

Bootstrap confidence interval estimates of cpk: an introduction

The interpretation of C_pk:, a common measure of process capability and confidence limits for it, is based on the assumption that the process is normally distributed. The non-parametric but computer intensive method called Bootstrap is introduced and three Bootstrap confidence interval estimates for C^ are defined. An initial simulation of two processes (one normal and the other highly skewed) is presented and discussed     

Short run spc based upon the second order dynamic linear model for trend detection

Recently, several new applications of control chart procedures for short production runs have been introduced. Bothe (1989) and Burr (1989) proposed the use of control chart statistics which are obtained by scaling the quality characteristic by target values or process estimates of a location and scale parameter. The performance of these control charts can be significantly affected by the use of incorrect scaling parameters, resulting in either an excessive "false alarm rate," or insensitivity to the detection of moderate shifts in the process. To correct for these deficiencies, Quesenberry (1990, 1991) has developed the Q-Chart which is formed from running process estimates of the sample mean and variance. For the case where both the process mean and variance are unknown, the Q-chaxt statistic is formed from the standard inverse Z-transformation of a t-statistic. Q-charts do not perform correctly, however, in the presence of special cause disturbances at process startup. This has recently been supported by results published by Del Castillo and Montgomery (1992), who recommend the use of an alternative control chart procedure which is based upon a first-order adaptive Kalman filter model Consistent with the recommendations by Castillo and Montgomery, we propose an alternative short run control chart procedure which is based upon the second order dynamic linear model (DLM). The control chart is shown to be useful for the early detection of unwanted process trends. Model and control chart parameters are updated sequentially in a Bayesian estimation framework, providing the greatest degree of flexibility in the level of prior information which is incorporated into the model. The result is a weighted moving average control chart statistic which can be used to provide running estimates of process capability. The average run length performance of the control chart is compared to the optimal performance of the exponentially weighted moving average (EWMA) chart, as reported by Gan (1991). Using a simulation approach, the second order DLM control chart is shown to provide better overall performance than the EWMA for short production run applications     

EVVMA and cusum control charts in the presence of correlation

The statistical properties of control charts are usually evaluated under the assumption that the observations from the process are independent. For many processes however, observations which are closely spaced in time will be correlated. This paper considers EWMA and CUSUM control charts for the process mean when the observations are from an AR(1) process with additional random error. This simple model may be a reasonable model for many processes encountered in practice. The ARL and steady state ARL of the EWMA and CUSUM charts are evaluated numerically using an integral equation approach and a Markov chain approach. The numerical results show that correlation can have a significant effect on the properties of these charts. Tables are given to aid in the design of these charts when the observations follow the assumed model.     

Hierarchical bayes quality measurement plan

Quality Measurement Plan (QMP) as developed by Hoadley (1981) is a statistical method for analyzing discrete quality audit data which consist of the expected number of defects given the standard quality. The QMP is based on an empirical Bayes (EB) model of the audit sampling process. Despite its wide publicity, Hoadley's method has often been described as heuristic. In this paper we offer an hierarchical Bayes (HB) alternative to Hoadley's EB model, and overcome much of the criticism against this model. Gibbs sampling is used to implement the HB model proposed in this paper. Also, the convergence of the Gibbs sampler is monitored via the algorithm of Gelman and Rubin (1992).     

Bootstrap test of hypothesis for the multi-state models in survival analysis

Abstract

In the present paper we develop bootstrap tests of hypothesis, based on simulation, for the transition probability matrix arising in the context of a multi-state model. The bootstrap test statistic is based on the paper of Tattar and Vaman (2008 Tattar, P. N., Vaman, H. J. (2008). Testing transition probability matrix of a multi-state model with censored data. Lifetime Data Anal. 14(2):216–230.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]), which develops a statistic for the testing problems concerning the transition probability matrix of the non homogeneous Markov process.     

Test for periodicity in restrictive EXPAR models

Abstract

This article is devoted to study the problem of test of periodicity in the restricted exponential autoregressive (EXPAR) model. The local asymptotic normality property, of this model, is shown via the adapted sufficient conditions due to Swensen (1985 Swensen, A.R. (1985). The asymptotic distribution of the likelihood ratio for autoregressive time series with a regression trend. J. Multivariate Anal. 16:54–70.[Crossref], [Web of Science ®] , [Google Scholar]). Using this result, in the case where the innovation density is specified, we obtain a parametric local asymptotic “most stringent” test.