区域电力市场结构、所有权结构对发电企业效率影响的实证研究

以我国电力产业放松规制的实践为背景,基于产业组织理论构建了区域电力市场结构、所有权结构对发电企业效率影响的综合模型。以1999~2006年电力行业上市公司的统计数据为样本,采用分层线性模型回归方法对市场结构和所有权结构对发电企业效率的影响效果和影响路径进行了研究。实证结果表明:电力行业市场集中度下降有利于我国电力企业效率提升;电力行业国有所有权比重下降有利于企业效率的提升;电力行业企业数量和国有所有权比重对企业效率存在负向交互影响作用,但不显著。     

中国股票市场风险因素相关性研究

在传统的多元回归模型基础上,利用动态模型并结合分位数模型,研究了中国股票市场的风险因素如公司规模、账面市值比和流动性之间的相关性。研究结果表明,在考虑了流动性的滞后影响后,公司规模与其股票流动性之间存在显著的正相关关系,而账面市值比与股票流动性之间存在显著的负相关关系,进而揭示了流动性溢价理论可以解释股票市场中的规模效应和价值效应的原因。     

加权复合分位数回归方法在动态VaR风险度量中的应用

风险价值(VaR)因为简单直观,成为了当今国际上最主流的风险度量方法之一,而基于时间序列自回归(AR)模型来计算无条件风险度量值在实业界有广泛应用。本文基于分位数回归理论对AR模型提出了一个估计方法--加权复合分位数回归(WCQR)估计,该方法可以充分利用多个分位数信息提高参数估计的效率,并且对于不同的分位数回归赋予不同的权重,使得估计更加有效,文中给出了该估计的渐近正态性质。有限样本的数值模拟表明,当残差服从非正态分布时,WCQR估计的的统计性质接近于极大似然估计,而该估计是不需要知道残差分布的,因此,所提出的WCQR估计更加具有竞争力。此方法在预测资产收益的VaR动态风险时有较好的应用,我们将所提出的理论分析了我国九只封闭式基金,实证分析发现,结合WCQR方法求得的VaR风险与用非参数方法求得的VaR风险非常接近,而结合WCQR方法可以计算动态的VaR风险值和预测资产收益的VaR风险值。     

基于非参数回归的遗漏变量检验

基于非参数回归提出了同时适用于横截面和时间序列数据的遗漏变量检验统计量.与现有文献相比,该统计量不仅避免了模型设定偏误问题,而且具有更高的局部检验功效,能够识别出速度更快的收敛到原假设的局部备择假设.该文选择单一带宽估计条件联合期望和条件边际期望,允许二者的非参数估计误差共同决定统计量的渐近分布,不仅改善了统计量的有限样本性质,而且避免了选择多个带宽和计算多个偏差项产生的繁杂工作.蒙特卡洛模拟结果表明该统计量具有良好的有限样本性质以及比Ait-Sahalia等更高的检验功效.实证分析采用该统计量捕获了F统计量无法识别的产出缺口与通胀之间关系,验证了非线性“产出一通胀”型菲利普斯曲线在中国的适用性.     

Practical Maximum Pseudolikelihood for Spatial Point Patterns(with Discussion)

This paper describes a technique for computing approximate maximum pseudolikelihood estimates of the parameters of a spatial point process. The method is an extension of Berman & Turner's (1992) device for maximizing the likelihoods of inhomogeneous spatial Poisson processes. For a very wide class of spatial point process models the likelihood is intractable, while the pseudolikelihood is known explicitly, except for the computation of an integral over the sampling region. Approximation of this integral by a finite sum in a special way yields an approximate pseudolikelihood which is formally equivalent to the (weighted) likelihood of a loglinear model with Poisson responses. This can be maximized using standard statistical software for generalized linear or additive models, provided the conditional intensity of the process takes an 'exponential family' form. Using this approach a wide variety of spatial point process models of Gibbs type can be fitted rapidly, incorporating spatial trends, interaction between points, dependence on spatial covariates, and mark information.     

Factors influencing Soay sheep survival

We present a survival analysis of Soay sheep mark recapture and recovery data. Unlike previous conditional analyses, it is not necessary to assume equality of recovery and recapture probabilities; instead these are estimated by maximum likelihood. Male and female sheep are treated separately, with the higher numbers and survival probabilities of the females resulting in a more complex model than that used for the males. In both cases, however, age and time aspects need to be included and there is a strong indication of a reduction in survival for sheep aged 7 years or more. Time variation in survival is related to the size of the population and selected weather variables, by using logistic regression. The size of the population significantly affects the survival probabilities of male and female lambs, and of female sheep aged 7 or more years. March rainfall and a measure of the North Atlantic oscillation are found to influence survival significantly for all age groups considered, for both males and females. Either of these weather variables can be used in a model. Several phenotypic and genotypic individual covariates are also fitted. The only covariate which is found to influence survival significantly is the type of horn of first-year female sheep. There is a substantial variation in the recovery probabilities over time, reflecting in part the increased effort when a population crash was expected. The goodness of fit of the model is checked by using graphical procedures.     

Bootstrapping regression models with BLUS residuals

To bootstrap a regression problem, pairs of response and explanatory variables or residuals can be resam‐pled, according to whether we believe that the explanatory variables are random or fixed. In the latter case, different residuals have been proposed in the literature, including the ordinary residuals (Efron 1979), standardized residuals (Bickel & Freedman 1983) and Studentized residuals (Weber 1984). Freedman (1981) has shown that the bootstrap from ordinary residuals is asymptotically valid when the number of cases increases and the number of variables is fixed. Bickel & Freedman (1983) have shown the asymptotic validity for ordinary residuals when the number of variables and the number of cases both increase, provided that the ratio of the two converges to zero at an appropriate rate. In this paper, the authors introduce the use of BLUS (Best Linear Unbiased with Scalar covariance matrix) residuals in bootstrapping regression models. The main advantage of the BLUS residuals, introduced in Theil (1965), is that they are uncorrelated. The main disadvantage is that only n —p residuals can be computed for a regression problem with n cases and p variables. The asymptotic results of Freedman (1981) and Bickel & Freedman (1983) for the ordinary (and standardized) residuals are generalized to the BLUS residuals. A small simulation study shows that even though only n — p residuals are available, in small samples bootstrapping BLUS residuals can be as good as, and sometimes better than, bootstrapping from standardized or Studentized residuals.     

Correlation in a Bayesian framework

The authors consider the correlation between two arbitrary functions of the data and a parameter when the parameter is regarded as a random variable with given prior distribution. They show how to compute such a correlation and use closed form expressions to assess the dependence between parameters and various classical or robust estimators thereof, as well as between p‐values and posterior probabilities of the null hypothesis in the one‐sided testing problem. Other applications involve the Dirichlet process and stationary Gaussian processes. Using this approach, the authors also derive a general nonparametric upper bound on Bayes risks.     

Differential equation models for statistical functions

Differential equations have been used in statistics to define functions such as probability densities. But the idea of using differential equation formulations of stochastic models has a much wider scope. The author gives several examples, including simultaneous estimation of a regression model and residual density, monotone smoothing, specification of a link function, differential equation models of data, and smoothing over complicated multidimensional domains. This paper aims to stimulate interest in this approach to functional estimation problems, rather than provide carefully worked out methods.     

Bayes linear analysis for graphical models: The geometric approach to local computation and interpretive graphics

This paper concerns the geometric treatment of graphical models using Bayes linear methods. We introduce Bayes linear separation as a second order generalised conditional independence relation, and Bayes linear graphical models are constructed using this property. A system of interpretive and diagnostic shadings are given, which summarise the analysis over the associated moral graph. Principles of local computation are outlined for the graphical models, and an algorithm for implementing such computation over the junction tree is described. The approach is illustrated with two examples. The first concerns sales forecasting using a multivariate dynamic linear model. The second concerns inference for the error variance matrices of the model for sales, and illustrates the generality of our geometric approach by treating the matrices directly as random objects. The examples are implemented using a freely available set of object-oriented programming tools for Bayes linear local computation and graphical diagnostic display.