排序方式: 共有21条查询结果,搜索用时 15 毫秒
1.
针对交流电弧炉电极控制系统具有非线性时变、多变量、强耦合及存在随机干扰的特点,采用基于最近邻聚类方法的径向基函数(RBF)神经网络快速学习算法,通过实时在线辨识,建立电弧炉电极系统的精确逆模型并用于控制,实现了将具有强耦合特性的多变量输入/输出(MIMO)系统解耦成单个独立的伪线性对象,并提出一种基于RBF神经网络逆控制与比例微分(P/D)控制相结合的双模控制策略。应用结果证实了该控制策略具有快速适应对象和过程变化的能力及较强的鲁棒性。 相似文献
2.
针对传统基于继电器控制的稳压电源在带负载工作时,档位切换常常伴随火弧现象的问题,设计了一种可广泛
应用于此类稳压电源上的自适应去火弧技术:使用光耦和多级运放完成对零点和电压电流的采样;基于单片机的10量,
实现对继电器的驱动和控制;基于RCC自激震荡原理为系统提供稳定电源;设计了稳压器的完整软件系统程序,并在软
件中应用自适应去火弧算法。实验结果表明:自适应去火弧技术,能够有效地规避火弧现象的产生,并能够根据条件作
出调整。采用自适应去火弧技术的稳压系统达到了设计目标,延长了系统工作寿命。 相似文献
3.
4.
本文介绍了目前逆变式弧焊机的硒原理和技术现状,并指出了有待进一步解决的几个技术问题。 相似文献
5.
本文介绍利用球面渐开线方程计算圆锥齿轮背锥齿形弧齿厚的方法,并通过实例指出利用当量圆柱齿轮计算弧齿厚的理论误差。 相似文献
6.
太极拳上肢多呈圆形、弧形、螺旋形动作,这种动作不仅独特并且有着深刻的科学和文化内涵.圆弧形动作符合人体运动解剖的生理结构,符合击技中的动力学原理,适合周身的气血运行,对中枢神经、植物神经具有良好的生理保健作用. 相似文献
7.
潘会平 《长江大学学报(社会科学版)》2004,27(5):35-37
首先指出弹性分类表述中存在不准确的地方 ,然后以需求弹性为例 ,着重从弧弹性上说明和证明了弹性分类的数学表达 ;最后对两种数学表达进行总结 ,给出关于弹性分类的两种数学表达的准确形式。 相似文献
8.
针对丝网焊前存在下料要求高、焊前清洗难、装配繁杂,以及丝网结构的特殊性造成接头金属熔化时润湿难、跳
弧、结球等问题,研究了国内外丝网焊接工艺在焊接方法、焊接接头和装配方式等方面的发展动态。探讨了钨极氩弧焊、
电阻焊、微束等离子弧焊等方法焊接丝网时的优缺点,研究了不同接头形式下的装配方式及其最优装配量的范围,得出
了在各种使用情况下不同的焊接方法所适合的接头形式。最后提出在丝网焊接过程中加入视觉传感技术等以提高焊接
精度和生产效率是进一步研究的方向。 相似文献
9.
对镁合金微弧氧化法处理工艺及添加剂对氧化膜的影响进行了研究,确定了添加剂的影响力大小及用量范围,得到了性能良好的氧化膜. 相似文献
10.
Satesh Ramdhani Ram Tripathi Jerome Keating Narayanaswamy Balakrishnan 《统计学通讯:模拟与计算》2013,42(9):2612-2623
ABSTRACTGasoline service stations that use underground storage tanks (UST) assume that the manufactured tank is an ideal cylindrical shape. This cross-sectional shape plays a crucial role in determining a functional form for the volume of liquid that remains inside the tank. In industry, these formulas are used to compute strapping charts. But realistically, the manufacture, assembly, and installation of a tank may have deviation from the actual tank design (for which strapping charts had been developed). A theoretical volume function (based on tank dimensions) is used alongside of statistical methodology to reconcile volume differences in gasoline dispensed at the pump meters versus that displaced inside the tank. Statistical inventory reconciliation of this nature falls within the family of leak detection methods approved by the EPA (Environmental Protection Agency) and the California Water Resources Board. This methodology can also be used to assess deformation of the cross-sectional shape of the tank. We consider a deformation to an ellipse. Through simulation, we estimate the tank dimensions based on a nonlinear model with normal errors. The use of normal errors naturally facilitates a likelihood ratio test. Through this exploration, an approximation function is developed to help improve the power of the likelihood ratio test. 相似文献