首页 | 本学科首页   官方微博 | 高级检索  
     检索      

烟熏炉换热器进口主流道流动性改进
引用本文:陈斐奇,祝高永,刘 红,陈嘉宏,杨哲人.烟熏炉换热器进口主流道流动性改进[J].华南农业大学学报(社会科学版),2014,32(6).
作者姓名:陈斐奇  祝高永  刘 红  陈嘉宏  杨哲人
作者单位:1.浙江工业大学机械工程学院,浙江杭州310014:2.浙江瑞邦机械有限公司,浙江嘉兴314006
基金项目:浙江省嘉兴市科技计划项目(2013BY12002)
摘    要:针对某一类型烟熏炉换热器进口主流道出口产生局部负压的问题,借助CFD仿真分析手段找出进口主流道结 构缺陷,提出了岔口几何形状的改变结构。分别对这2种不同结构的进口主流道管在Fluent平台上进行内流场分析,对 比两者之间的差异,表明改进后的进口管流速更加均匀,克服了原进口主流道管存在的问题,使得进入各组U型管的蒸 气相对均匀,换热效率得到提高。

关 键 词:换热器  数值分析  烟熏炉  流场

Fluidity Improvement for Inlet Main Pipe of Heat Exchanger in Fumigation Oven
CHEN Feiqjl,ZHU Gaoyong,LIU Hongl,CHEN Jiahong,YANG Zherenl.Fluidity Improvement for Inlet Main Pipe of Heat Exchanger in Fumigation Oven[J].Journal of South China Agricultural University:Social Science Edition,2014,32(6).
Authors:CHEN Feiqjl  ZHU Gaoyong  LIU Hongl  CHEN Jiahong  YANG Zherenl
Institution:1. College of Mechanical Engineering, Zhejiang Universitv of Technology, Hangzhou 310014, China;2. Zhejiang Ribon Machine Co., Ltd., Jiaxing, Zhejiang 314006, China
Abstract:The paper studied structure problem of inlet main pipe of heat exchanger for a certain fumigation oven. i. e. . its outlet generated local negative pressure, found out its defect by use of CFD simulation way, and put forwards the improved structure which changed the shape of the branch. Based on Fluent the paper analyzed the internal flow fields of the pipes for these two different structures. and the results were compared. The results show that flow pressure velocity inlet pipe is more reasonable and the problem disappears. So the vapor in the different set of U pipes is relatively uniform. the efficiency of heat exchanger is also improved.
Keywords:heat exchanger  numerical analysis  fumigation oven  flow field
点击此处可从《华南农业大学学报(社会科学版)》浏览原始摘要信息
点击此处可从《华南农业大学学报(社会科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号