基于单片机控制的编织袋折边折角装置设计

为提高编织袋折边折角的自动化水平和效率，更好地与编织袋缝纫工序结合起来，文章设计了基于单片机控制的编织袋折边折角装置.首先利用Pro/E 4.0设计了编织袋折边折角装置的机械结构三维模型，然后在Microsoft Office Visio中设计了该设备的气动系统，最后利用AT89C51单片机对该套设备进行设计与控制.结果表明，这套编织袋折边折角装置结构紧凑合理，成本控制在1万多元，单片机控制系统稳定有效，整个折边折角动作耗时在6 s左右，效率较高，能够真正提高编织袋折边折角自动化水平，具有很高的工程实践价值.

Design on the flanging and folding mechanism of woven bag based on the single-chip microcomputer control

In order to improve the level of automation and efficiency of the flanging and folding mechanism of woven bag, for better combined with sewing process of the woven bag, the flanging and folding mechanism of woven bag based on sing-chip microcomputer control has been designed in this paper. First of all, the three-dimensional model of the mechanical structure of the flanging and folding mechanism is designed using Pro/E 4.0. In the following, the pneumatic system of this device is produced in Microsoft Office Visio. Finally, the design and control on this equipment has been conducted on the basis of AT89C51 single-chip microcomputer. The results show that this device has compact and reasonable structure and it cost about more than 10 000 RMB. It can achieve the effect of stable and effective control by using the AT89C51 single-chip microcomputer in the control system. The entire action takes about six seconds; it indicates the more efficient than before. That is to say, this mechanism can really improve the level of automation of the flanging and folding procedure of woven bag and has a high practical value in engineering.