| TC4钛合金焊后电子束局部热处理残余应力有限元分析 |
| |
| 引用本文： | 陈芙蓉,解瑞军,张可荣.TC4钛合金焊后电子束局部热处理残余应力有限元分析[J].内蒙古工业大学学报,2006,25(1):21-24. |
| |
| 作者姓名： | 陈芙蓉 解瑞军 张可荣 |
| |
| 作者单位： | 内蒙古工业大学材料科学与工程学院 呼和浩特010051 |
| |
| 摘 要： | 针对TC 4钛合金电子束焊接及焊后局部热处理过程,采用AN SY S非线性有限元程序,模拟了TC 4钛合金电子束焊态和焊后电子束局部热处理的实际焊接温度场以及焊接接头应力场的变化和残余应力的分布.主要研究了焊后电子束局部热处理工艺对焊接接头残余应力的影响规律.结果表明,焊后电子束局部热处理可以降低焊缝及近缝区的残余应力峰值,并可使应力重新分布,即应力峰值点向母材扩展.
|
| 关 键 词： | TC4钛合金 真空电子束局部热处理 数值模拟 |
| 文章编号： | 1001-5167(2006)01-0021-04 |
| 收稿时间： | 2005-06-10 |
| 修稿时间： | 2005年6月10日 |
FINITE ELEMENT ANALYSIS OF RESIDUAL STRESSES IN TC4 TITANIUM ALLOY AFTER POST-WELD ELECTRON BEAM LOCAL HEAT TREATMENT |
| |
| CHEN Fu-rong,XIE Rui-jun,ZHANG Ke-rong.FINITE ELEMENT ANALYSIS OF RESIDUAL STRESSES IN TC4 TITANIUM ALLOY AFTER POST-WELD ELECTRON BEAM LOCAL HEAT TREATMENT[J].Journal of Inner Mongolia Polytechnic University(Social Sciences Edition),2006,25(1):21-24. |
| |
| Authors: | CHEN Fu-rong XIE Rui-jun ZHANG Ke-rong |
| |
| Institution: | School of Materials Science and Engineering. Inner Mongolia University of Technology. Hohhot 010051, PRC |
| |
| Abstract: | In order to study the electron beam welding of TC4 and the local heat treatment after welding,ANSYS nonlinear finite element software is used to simulate the welding temperature fields,the distributions of residual stresses in AW and the electron EBLPWHT conditions.The effect of electron beam local heat treatment on residual stresses of welded joints is investigated.Results show that the electron beam local heat treatment after welding can reduce the residual stress peak value and redistribute the residual stresses.In other words,it can diffuse the stress peak value into the base metal. |
| |
| Keywords: | TC4 titanium alloy electron beam local heat treatment numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
