| 基于MATLAB的管壳式换热器优化设计 |
| |
| 引用本文： | 王雷,蒋宁. 基于MATLAB的管壳式换热器优化设计[J]. 华南农业大学学报(社会科学版), 2012, 30(2) |
| |
| 作者姓名： | 王雷 蒋宁 |
| |
| 作者单位： | 浙江工业大学 化工过程机械研究所, 浙江 杭州 310014 |
| |
| 摘 要： | 基于MATLAB 7.6开发了管壳式换热器,充分利用压降优化设计软件。通过改变换热器结构,充分利用管壳程压降,提高传热系数,减少换热面积。通过案例分析表明,充分利用压降后,换热器的传热系数提高了21%,换热面积减小了20%,大大减少了换热器的投资费用。
|
| 关 键 词： | 传热学 管壳式换热器 MATLAB软件 压降 传热系数 换热面积 |
Optimizing Design for Shell and Tube Heat Exchanger Based on MATLAB |
| |
| WANG Lei,JIANG Ning. Optimizing Design for Shell and Tube Heat Exchanger Based on MATLAB[J]. Journal of South China Agricultural University:Social Science Edition, 2012, 30(2) |
| |
| Authors: | WANG Lei JIANG Ning |
| |
| Abstract: | Making best use of pressure drop, the paper developed an optimizing design software for shell and tube heat exchanger based on MATLAB 7.6. By varying the structures of heat exchanger, fully using of pressure drop between shell and tube gap can improve heat transfer coefficient and reduce heat exchange area. By analysis of the designed case, the results prove that the heat transfer coefficient increases by 21% and the heat exchange area reduces by 20%, thus the cost of heat exchanger can be decreased greatly. |
| |
| Keywords: | heat transfer shell and tube heat exchanger MATLAB software pressure drop heat transfer coefficient heat exchange area |
|
| 点击此处可从《华南农业大学学报(社会科学版)》浏览原始摘要信息 |
|
点击此处可从《华南农业大学学报(社会科学版)》下载全文 |
