| 基于有限元的钢制烘缸应力计算与评定 |
| |
| 引用本文： | 高红利,李伟军.基于有限元的钢制烘缸应力计算与评定[J].华南农业大学学报(社会科学版),2014,32(3). |
| |
| 作者姓名： | 高红利 李伟军 |
| |
| 作者单位： | 1．广东石油化工学院机电学院，广东茂名 525000：
2．广东省特种设备检测研究院顺德检测院，广东佛山528300 |
| |
| 摘 要： | 为研究一台带内拉筒的钢制焊接烘缸的应力分布情况和结构安全性，采用有限元法，对烘缸的应力进行了有限
元计算和分析，得到了烘缸的应力分布图，并对危险区域的应力强度进行了分析和评定。结果表明：最大应力出现在烘
缸盖板与外筒体及内拉筒连接处的环带和盖板人孔开孔处的内侧区域，该区域是影响结构安全的危险区域。
|
| 关 键 词： | 造纸机械 钢制烘缸 有限元 应力分析 |
Stress Analysis and Evaluation of Steel Dryer Based on Finite Element Method |
| |
| GAO Hongli,LI Weijun.Stress Analysis and Evaluation of Steel Dryer Based on Finite Element Method[J].Journal of South China Agricultural University:Social Science Edition,2014,32(3). |
| |
| Authors: | GAO Hongli LI Weijun |
| |
| Institution: | 1. College of Mechanical and Electrical Engineering, Guangdong University of
Petrochemic al Technology , Maoming , Guangdong 525000 , China ;
2. Shunde Detection , Special Equipment Inspection Institute of Guangdong Province , Foshan , Guangdong 528300 , China |
| |
| Abstract: | To study the stress distribution and the safety of a steel dryer in paper making machine. the finite element
method was used and the 3D finite element model was built. The stress on the dryer was calculated. The stress
distribution contour of the dryer was obtained and the maximum stress was analyzed and evaluated. The results show that
the zones with maximum stress occur at the connection area of head with cylinders and inside of boundary stress region of
manway opening. |
| |
| Keywords: | paper making machinery steel dryer finite element method stress analysis |
|
| 点击此处可从《华南农业大学学报(社会科学版)》浏览原始摘要信息 |
| 点击此处可从《华南农业大学学报(社会科学版)》下载免费的PDF全文 |
