| 刨床的光学对刀方法及其在罗茨转子加工中的应用 |
| |
| 引用本文： | 刘超英,黄鹏,董克权,李廷洪,成红英. 刨床的光学对刀方法及其在罗茨转子加工中的应用[J]. 肇庆学院学报, 2011, 32(5): 25-27,45 |
| |
| 作者姓名： | 刘超英 黄鹏 董克权 李廷洪 成红英 |
| |
| 作者单位： | 肇庆学院电子信息与机电工程学院,广东肇庆,526061 |
| |
| 基金项目： | 肇庆市产、学、研合作专项基金资助项目 |
| |
| 摘 要： | 利用2个LED开关组成刨床的光电对刀机构.其中一只LED光电开关直接安装在工作台上;另一只则安装在电机轴上,再经过10：1的减速器连接工作台的驱动丝杠.2只LED输出的脉冲经过逻辑＂与＂运算之后给设备发出停止信号.这样的刨床即可用于罗茨转子的粗加工,也可以用于罗茨转子的精加工.
|
| 关 键 词： | 刨床 光学对刀 罗茨转子 加工 |
Method of Optoelectronic Planer Tool Preset and Its Application in Roots Type Rotor Manufacture |
| |
| LIU Chaoying,HUANG Peng,DONG Kequan,LI Tinghong,CHENG Hongying. Method of Optoelectronic Planer Tool Preset and Its Application in Roots Type Rotor Manufacture[J]. Journal of Zhaoqing University (Bimonthly), 2011, 32(5): 25-27,45 |
| |
| Authors: | LIU Chaoying HUANG Peng DONG Kequan LI Tinghong CHENG Hongying |
| |
| Affiliation: | LIU Chaoying,HUANG Peng,DONG Kequan,LI Tinghong,CHENG Hongying(College of Electronic Information and Mechantronic Engineering,Zhaoqing University,Zhaoqing,Guangdong 526061,China) |
| |
| Abstract: | Using two LED switches,an optoelectronic planer tool preset machinery was designed.One of the LED switch was directly located on the operation table,and another one was located on the axis after it times 10 of the main driven screw.These two output pulses together gave a stop signal to the machine after a logical AND operation.The planer could be used for roots type rotor manufacture both in rough process and in fine process. |
| |
| Keywords: | planer optical tool preset roots type rotor manufacture |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
