首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于D类放大器的外置式DBS的驱动电路设计
引用本文:李刚,白冰,林凌,于超.基于D类放大器的外置式DBS的驱动电路设计[J].福建农林大学学报(哲学社会科学版),2009(3).
作者姓名:李刚  白冰  林凌  于超
作者单位:天津大学生物医学信息检测与处理实验室;
摘    要:以DBS的治疗参数为依据,设计了外置式DBS的驱动电路。以单片机MSP430的PWM输出作为信号源,来控制D类放大器的开关,D类放大器的双端输出用以驱动初级线圈。通过实验可在模拟负载两端获得有效的单极性刺激脉冲,此脉冲会随着信号源的频率,占空比等参数的变化发生相应的变化,并且得到了3%的传输效率,证明了D类放大器用于外置式DBS的驱动电路的可行性。

关 键 词:外置式脑起搏器  D类放大器  驱动电路  单极性脉冲  

Design of Driving Circuit for External DBS Based on Class D
Gang Li,Bing Bai,Ling Lin,Chao Yu.Design of Driving Circuit for External DBS Based on Class D[J].Journal of Fujian Agriculture and Forestry University,2009(3).
Authors:Gang Li  Bing Bai  Ling Lin  Chao Yu
Institution:Biomedical Signal Detecting and Processing Laboratory in Tianjin University;Tianjin University;300072
Abstract:Based on stimulating parameters of DBS,The external DBS drive circuits are designed.PWM signal from singlechip MSP430 drives Class D and differential outputs of Class D connect primary coils.The result show that unipolar pulses can get from simulated load and the change of the pulses correspond with the change of signal source,frequency and duty cycle.After the calculation,transmission efficiency is 3%.All of these prove that Class D can drives external DBS effectively.
Keywords:External DBS  Class D  drive circuits  unipolar pulses  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号