| 基于灰色GM(1,1)模型的注塑成型压力的预测与研究 |
| |
| 引用本文： | 王鹏程,姚涛.基于灰色GM(1,1)模型的注塑成型压力的预测与研究[J].内蒙古工业大学学报,2004,23(3):201-204. |
| |
| 作者姓名： | 王鹏程 姚涛 |
| |
| 作者单位： | 内蒙古工业大学材料科学与工程学院，内蒙古工业大学材料科学与工程学院 呼和浩特010062，呼和浩特010062 |
| |
| 摘 要： | 本文针对注塑成型过程中注射压力的优化及预测问题．应用注射过程流动模拟软件HSCAE3DRF5．1及三维实体造型软件PRO／E2000i．以洗衣机后挡板注塑件为实例研究对象，组织注射压力和注射时间的输入输出参数样本，建立灰色GM(1，1)模型，同CAE模拟结果比较，其误差在允许的工程误差范围之内，证实了该模型在注塑压力优化和预测中的可行性．
|
| 关 键 词： | 灰色GM（1，1）模型 注塑模CAE 优化 |
| 文章编号： | 1001-5167(2004)03-0201-04 |
| 修稿时间： | 2004年9月14日 |
THE OPTIMIZATION AND PREDICTION OF PRESSURE OF INJECTION MOLDING BASED ON GM (1,1) |
| |
| WANG Peng-cheng,YAO Tao.THE OPTIMIZATION AND PREDICTION OF PRESSURE OF INJECTION MOLDING BASED ON GM (1,1)[J].Journal of Inner Mongolia Polytechnic University(Social Sciences Edition),2004,23(3):201-204. |
| |
| Authors: | WANG Peng-cheng YAO Tao |
| |
| Abstract: | This paper aims at studying the optimization and prediction of injection pressure during the injection molding process.Based on the simulation software of the filling flow HSCAE and the three-dimensional modeling software PRO/E,using the backboard of washing machine as the object of study,the input and output parameters of injection pressure and time are collected,and a GM (1,1) model is built.Its results are close to those from CAE analysis,and its error falls within the engineering-permitted error range.This proves the applicability of the Grey Model in the optimization and prediction of the injection pressure during the injection molding process. |
| |
| Keywords: | Grey GM (1 1) Model injection molding CAE optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
