Optimal estimation for the Pareto distribution

This paper proposes an optimal estimation method for the shape parameter, probability density function and upper tail probability of the Pareto distribution. The new method is based on a weighted empirical distribution function. The exact efficiency functions of the estimators relative to the existing estimators are derived. The paper gives L ₁-optimal and L ₂-optimal weights for the new weighted estimator. Monte Carlo simulation results confirm the theoretical conclusions. Both theoretical and simulation results show that the new estimation method is more efficient relative to several existing methods in many situations.     

A note on james-stein and bayes empiricl bayes estimators

In an empirical Bayes decision problem, a simple class of estimators is constructed that dominate the James-Stein

estimator, A prior distribution A is placed on a restricted (normal) class G of priors to produce a Bayes empirical Bayes estimator, The Bayes empirical Bayes estimator is smooth, admissible, and asymptotically optimal. For certain A rate of convergence to minimum Bayes risk is 0(n^-1)uniformly on G. The results of a Monte Carlo study are presented to demonstrate the favorable risk bebhavior of the Bayes estimator In comparison with other competitors including the James-Stein estimator.     

Superiority of the r–k Class Estimator Over Some Estimators In A Linear Model

In regression analysis, to overcome the problem of multicollinearity, the r ? k class estimator is proposed as an alternative to the ordinary least squares estimator which is a general estimator including the ordinary ridge regression estimator, the principal components regression estimator and the ordinary least squares estimator. In this article, we derive the necessary and sufficient conditions for the superiority of the r ? k class estimator over each of these estimators under the Mahalanobis loss function by the average loss criterion. Then, we compare these estimators with each other using the same criterion. Also, we suggest to test to verify if these conditions are indeed satisfied. Finally, a numerical example and a Monte Carlo simulation are done to illustrate the theoretical results.     

Empirical Bayes sequential estimation of a finite population mean

In this article, we consider the Bayes and empirical Bayes problem of the current population mean of a finite population when the sample data is available from other similar (m-1) finite populations. We investigate a general class of linear estimators and obtain the optimal linear Bayes estimator of the finite population mean under a squared error loss function that considered the cost of sampling. The optimal linear Bayes estimator and the sample size are obtained as a function of the parameters of the prior distribution. The corresponding empirical Bayes estimates are obtained by replacing the unknown hyperparameters with their respective consistent estimates. A Monte Carlo study is conducted to evaluate the performance of the proposed empirical Bayes procedure.     

Marginal Likelihood Estimation with the Cross-Entropy Method

We consider an adaptive importance sampling approach to estimating the marginal likelihood, a quantity that is fundamental in Bayesian model comparison and Bayesian model averaging. This approach is motivated by the difficulty of obtaining an accurate estimate through existing algorithms that use Markov chain Monte Carlo (MCMC) draws, where the draws are typically costly to obtain and highly correlated in high-dimensional settings. In contrast, we use the cross-entropy (CE) method, a versatile adaptive Monte Carlo algorithm originally developed for rare-event simulation. The main advantage of the importance sampling approach is that random samples can be obtained from some convenient density with little additional costs. As we are generating independent draws instead of correlated MCMC draws, the increase in simulation effort is much smaller should one wish to reduce the numerical standard error of the estimator. Moreover, the importance density derived via the CE method is grounded in information theory, and therefore, is in a well-defined sense optimal. We demonstrate the utility of the proposed approach by two empirical applications involving women's labor market participation and U.S. macroeconomic time series. In both applications, the proposed CE method compares favorably to existing estimators.     

A Class of s–K Type Principal Components Estimators in the Linear Model

In this article, we introduce a new class of estimators called the s–K type principal components estimators to combat multicollinearity, which include the principal components regression (PCR) estimator, the r–k estimator and the s–K estimator as special cases. Necessary and sufficient conditions for the superiority of the new estimator over the PCR estimator, the r–k estimator and the s–K estimator are derived in the sense of the mean squared error matrix criterion. A Monte Carlo simulation study and a numerical example are given to illustrate the performance of the proposed estimator.     

Density Estimation by Total Variation Penalized Likelihood Driven by the Sparsity ℓ1 Information Criterion

Abstract. We propose a non‐linear density estimator, which is locally adaptive, like wavelet estimators, and positive everywhere, without a log‐ or root‐transform. This estimator is based on maximizing a non‐parametric log‐likelihood function regularized by a total variation penalty. The smoothness is driven by a single penalty parameter, and to avoid cross‐validation, we derive an information criterion based on the idea of universal penalty. The penalized log‐likelihood maximization is reformulated as an ?₁‐penalized strictly convex programme whose unique solution is the density estimate. A Newton‐type method cannot be applied to calculate the estimate because the ?₁‐penalty is non‐differentiable. Instead, we use a dual block coordinate relaxation method that exploits the problem structure. By comparing with kernel, spline and taut string estimators on a Monte Carlo simulation, and by investigating the sensitivity to ties on two real data sets, we observe that the new estimator achieves good L ₁ and L ₂ risk for densities with sharp features, and behaves well with ties.     

Profile Hellinger distance estimation

The successful application of the Hellinger distance approach to fully parametric models is well known. The corresponding optimal estimators, known as minimum Hellinger distance (MHD) estimators, are efficient and have excellent robustness properties [Beran R. Minimum Hellinger distance estimators for parametric models. Ann Statist. 1977;5:445–463]. This combination of efficiency and robustness makes MHD estimators appealing in practice. However, their application to semiparametric statistical models, which have a nuisance parameter (typically of infinite dimension), has not been fully studied. In this paper, we investigate a methodology to extend the MHD approach to general semiparametric models. We introduce the profile Hellinger distance and use it to construct a minimum profile Hellinger distance estimator of the finite-dimensional parameter of interest. This approach is analogous in some sense to the profile likelihood approach. We investigate the asymptotic properties such as the asymptotic normality, efficiency, and adaptivity of the proposed estimator. We also investigate its robustness properties. We present its small-sample properties using a Monte Carlo study.     

Optimal estimation for finite population mean in two-phase sampling

Using two-phase sampling scheme, we propose a general class of estimators for finite population mean. This class depends on the sample means and variances of two auxiliary variables. The minimum variance bound for any estimator in the class is provided (up to terms of ordern ⁻¹). It is also proved that there exists at least a chain regression type estimator which reaches this minimum. Finally, it is shown that other proposed estimators can reach the minimum variance bound, i.e. the optimal estimator is not unique.     

Positive-rule stein-type almost unbiased ridge estimator in linear regression model

Abstract

In this article, when it is suspected that regression coefficients may be restricted to a subspace, we discuss the parameter estimation of regression coefficients in a multiple regression model. Then, in order to improve the preliminary test almost ridge estimator, we study the positive-rule Stein-type almost unbiased ridge estimator based on the positive-rule stein-type shrinkage estimator and almost unbiased ridge estimator. After that, quadratic bias and quadratic risk values of the new estimator are derived and compared with some relative estimators. And we also discuss the option of parameter k. Finally, we perform a real data example and a Monte Carlo study to illustrate theoretical results.     

Feasible robust estimator in restricted semiparametric regression models based on the LTS approach

Under some nonstochastic linear restrictions based on either additional information or prior knowledge in a semiparametric regression model, a family of feasible generalized robust estimators for the regression parameter is proposed. The least trimmed squares (LTS) method proposed by Rousseeuw as a highly robust regression estimator is a statistical technique for fitting a regression model based on the subset of h observations (out of n) whose least-square fit possesses the smallest sum of squared residuals. The coverage h may be set between n/2 and n. The LTS estimator involves computing the hyperplane that minimizes the sum of the smallest h squared residuals. For practical purpose, it is assumed that the covariance matrix of the error term is unknown and thus feasible estimators are replaced. Then, we develop an algorithm for the LTS estimator based on feasible methods. Through the Monte Carlo simulation studies and a real data example, performance of the feasible type of robust estimators is compared with the classical ones in restricted semiparametric regression models.     

Double filter instrumental variable estimation of panel data models with weakly exogenous variables

In this article, we propose instrumental variables (IV) and generalized method of moments (GMM) estimators for panel data models with weakly exogenous variables. The model is allowed to include heterogeneous time trends besides the standard fixed effects (FE). The proposed IV and GMM estimators are obtained by applying a forward filter to the model and a backward filter to the instruments in order to remove FE, thereby called the double filter IV and GMM estimators. We derive the asymptotic properties of the proposed estimators under fixed T and large N, and large T and large N asymptotics where N and T denote the dimensions of cross section and time series, respectively. It is shown that the proposed IV estimator has the same asymptotic distribution as the bias corrected FE estimator when both N and T are large. Monte Carlo simulation results reveal that the proposed estimator performs well in finite samples and outperforms the conventional IV/GMM estimators using instruments in levels in many cases.     

Developing a restricted two-parameter Liu-type estimator: A comparison of restricted estimators in the binary logistic regression model

In the context of estimating regression coefficients of an ill-conditioned binary logistic regression model, we develop a new biased estimator having two parameters for estimating the regression vector parameter β when it is subjected to lie in the linear subspace restriction Hβ = h. The matrix mean squared error and mean squared error (MSE) functions of these newly defined estimators are derived. Moreover, a method to choose the two parameters is proposed. Then, the performance of the proposed estimator is compared to that of the restricted maximum likelihood estimator and some other existing estimators in the sense of MSE via a Monte Carlo simulation study. According to the simulation results, the performance of the estimators depends on the sample size, number of explanatory variables, and degree of correlation. The superiority region of our proposed estimator is identified based on the biasing parameters, numerically. It is concluded that the new estimator is superior to the others in most of the situations considered and it is recommended to the researchers.     

Application of shrinkage estimation in linear regression models with autoregressive errors

In this paper, we consider the shrinkage and penalty estimation procedures in the linear regression model with autoregressive errors of order p when it is conjectured that some of the regression parameters are inactive. We develop the statistical properties of the shrinkage estimation method including asymptotic distributional biases and risks. We show that the shrinkage estimators have a significantly higher relative efficiency than the classical estimator. Furthermore, we consider the two penalty estimators: least absolute shrinkage and selection operator (LASSO) and adaptive LASSO estimators, and numerically compare their relative performance with that of the shrinkage estimators. A Monte Carlo simulation experiment is conducted for different combinations of inactive predictors and the performance of each estimator is evaluated in terms of the simulated mean-squared error. This study shows that the shrinkage estimators are comparable to the penalty estimators when the number of inactive predictors in the model is relatively large. The shrinkage and penalty methods are applied to a real data set to illustrate the usefulness of the procedures in practice.     

Simulation study of new estimators combining the SUR ridge regression and the restricted least squares methodologies

In this paper, we propose two SUR type estimators based on combining the SUR ridge regression and the restricted least squares methods. In the sequel these estimators are designated as the restricted ridge Liu estimator and the restricted ridge HK estimator (see Liu in Commun Statist Thoery Methods 22(2):393–402, 1993; Sarkar in Commun Statist A 21:1987–2000, 1992). The study has been made using Monte Carlo techniques, (1,000 replications), under certain conditions where a number of factors that may effect their performance have been varied. The performance of the proposed and some of the existing estimators are evaluated by means of the TMSE and the PR criteria. Our results indicate that the proposed SUR restricted ridge estimators based on K _SUR, K _Sratio, K _Mratio and [(K)\ddot]{\ddot{K}} produced smaller TMSE and/or PR values than the remaining estimators. In contrast with other ridge estimators, components of [(K)\ddot]{\ddot{K}} are defined in terms of the eigenvalues of X^*￠ X^*{X^{{\ast^{\prime}}} X^{\rm \ast}} and all lie in the open interval (0, 1).     

ROBUST RIDGE REGRESSION BASED ON AN M-ESTIMATOR

Consider the linear regression model y =β₀1 +Xβ+ in the usual notation. It is argued that the class of ordinary ridge estimators obtained by shrinking the least squares estimator by the matrix (X¹X + kI)^-1X'X is sensitive to outliers in the ^variable. To overcome this problem, we propose a new class of ridge-type M-estimators, obtained by shrinking an M-estimator (instead of the least squares estimator) by the same matrix. Since the optimal value of the ridge parameter k is unknown, we suggest a procedure for choosing it adaptively. In a reasonably large scale simulation study with a particular M-estimator, we found that if the conditions are such that the M-estimator is more efficient than the least squares estimator then the corresponding ridge-type M-estimator proposed here is better, in terms of a Mean Squared Error criteria, than the ordinary ridge estimator with k chosen suitably. An example illustrates that the estimators proposed here are less sensitive to outliers in the y-variable than ordinary ridge estimators.     

On Estimating The Quantile Function For Distributions Constrained by Star-Shaped Ordering

Consider distributions F and G such that G ^-1 F is star-shaped. In the problem of estimating the quantile functions for lifetime distributions, the estimators developed by Rojo (1998) are compared with the commonly used empirical quantile function. Both the one-sample and the two-sample methods of estimation are considered for a wide class of lifetime distributions. In addition, the behavior of the estimators is examined for star-shaped ordered lifetime distributions of the important class of coherent k- out-of-n reliability systems. Results of a Monte Carlo study are presented which compare the behavior of the new estimators with that of the empirical quantile function interms of bias and mean-squared error. As the behavior of these estimators typically depends on the tail behavior of the underlying distributions, the examples presented here include distributions with short, medium and long tails. A formula for the inverse of the Kaplan-Meier estimator is provided and used to generate the simulations in the case of censored data.     

An improved and efficient biased estimation technique in logistic regression model

Abstract

In this article, we propose a new improved and efficient biased estimation method which is a modified restricted Liu-type estimator satisfying some sub-space linear restrictions in the binary logistic regression model. We study the properties of the new estimator under the mean squared error matrix criterion and our results show that under certain conditions the new estimator is superior to some other estimators. Moreover, a Monte Carlo simulation study is conducted to show the performance of the new estimator in the simulated mean squared error and predictive median squared errors sense. Finally, a real application is considered.     

Robust Linear Calibration

We regard the simple linear calibration problem where only the response y of the regression line y = β₀ + β₁ t is observed with errors. The experimental conditions t are observed without error. For the errors of the observations y we assume that there may be some gross errors providing outlying observations. This situation can be modeled by a conditionally contaminated regression model. In this model the classical calibration estimator based on the least squares estimator has an unbounded asymptotic bias. Therefore we introduce calibration estimators based on robust one-step-M-estimators which have a bounded asymptotic bias. For this class of estimators we discuss two problems: The optimal estimators and their corresponding optimal designs. We derive the locally optimal solutions and show that the maximin efficient designs for non-robust estimation and robust estimation coincide.     

Super efficient frequency estimation

In this paper we propose a modified Newton-Raphson method to obtain super efficient estimators of the frequencies of a sinusoidal signal in presence of stationary noise. It is observed that if we start from an initial estimator with convergence rate O_p(n⁻¹) and use Newton-Raphson algorithm with proper step factor modification, then it produces super efficient frequency estimator in the sense that its asymptotic variance is lower than the asymptotic variance of the corresponding least squares estimator. The proposed frequency estimator is consistent and it has the same rate of convergence, namely O_p(n^−3/2), as the least squares estimator. Monte Carlo simulations are performed to observe the performance of the proposed estimator for different sample sizes and for different models. The results are quite satisfactory. One real data set has been analyzed for illustrative purpose.