Families of proper generalized neighbor designs

A generalized neighbor design relaxes the equality condition on the number of times two treatments occur as neighbors in the design. In this article we have constructed a new series of generalized neighbor designs with equal block sizes, a series of neighbor designs of Rees [1967. Some designs of use in serology. Biometrics 23, 779–791] and a series of neighbor designs with two distinct block sizes. Two more new series of GN₂ designs are also constructed for even number of treatments. It has been shown that quasi neighbor designs introduced by Preece [1994. Balanced Ouchterlony neighbor designs. J. Combin. Math. Combin. Comput. 15, 197–219] are special cases of generalized neighbor designs with t=2$t=2$. All the designs given here are binary. A new definition—partially balanced circuit design is introduced which is a special case of generalized neighbor designs with binary blocks.     

Non-binary neighbor balance circular designs for v=2n and λ=2

Neighbor balance designs were first introduced by Rees (1967) in circular blocks for the use in serological research. Subsequently several researchers have defined the neighbor designs in different ways. In this paper, neighbor balance circular designs for (k≤v) block size are constructed for even number of treatments i.e. v=2n. No such series of designs is known in literature. Two theorems are developed for circular designs. Theorem 1 gives the non-binary circular blocks, whereas Theorem 2 generates binary circular blocks when n≤4 and non-binary blocks for n>4. In suggested designs no treatment is ever a neighbor of itself. Blocks are constructed in such a way that each treatment is a right and left neighbor of every other treatment for a fixed number of times say λ. Sizes of initial circular blocks are not same. One main guiding principle for such designs is to ensure economy in material use.     

Some new construction of circular weakly balanced repeated measurements designs in periods of two different sizes

Abstract

Balanced repeated measurements designs (RMDs) balance out the residual effects. Williams Latin square designs work as minimal combinatorial balanced as well as variance balanced for RMDs for p (period sizes) = v (number of treatments). If minimal balanced RMDs cannot be constructed for the situations where p must be less than v then weakly balanced RMDs should be preferred. In this article, some generators are developed to generate circular weakly balanced RMDs in periods of two different sizes. To obtain the proposed designs, some construction procedures are also described for some of the cases where we could not develop generators.     

A note on circular neighbor balanced designs

ABSTRACT

This paper describes some methods of constructing circular neighbor balanced and circular partially neighbor balanced block designs for estimation of direct and neighbor effects of the treatments. A class of circular neighbor balanced block designs with unequal block sizes is also proposed.     

Construction of neighbor designs of block size 4 for all values of v ≥ 5 by using the method of addition

In this article, a general method of construction of neighbor block designs is given. The designs are constructed using variation of a simple method which we refer to as the method of addition (renamed as the method of cyclic shifts). We give complete solution of neighbor balanced designs for k = 4 for any value of v. We also give many series of generalized neighbor designs (GNDs). In the last section, we have constructed GNDs in a sequential manner (as Did John 1981) for v ≤ 50 and r is multiple of k.     

Construction of circular partially balanced-Repeated measurement designs using cyclic shifts

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. These designs balance out the residual effects. The situations where balanced repeated measurements designs require a large number of the subjects, partially-balanced repeated measurements designs should be used. In this paper some infinite series are developed which provide circular partially-balanced repeated measurement designs for p (periods) even. Catalogues of circular partially-balanced repeated measurement designs are also presented for v (treatments) ≤ 100 with p = 5, 7 & 9.     

Some new constructions of circular balanced repeated measurements designs

Repeated measurements designs are widely used in medicine, pharmacology, animal sciences, and psychology. In this article, some infinite series are developed to generate the balanced repeated measurements designs for p (periods) even. For p odd, construction procedures are also described. Catalogues of the proposed designs are also presented for p = 5, 7, 9, when v ≤ 100.     

Some important classes of generalized neighbor designs for linear blocks

In this paper, some infinite series of generalized neighbor designs are constructed for the linear blocks which are useful to balance out the neighbor effects for the cases where (a) one of the v treatments has some neighbor effects with other treatments, while remaining (v – 1) treatments have half of that neighbor effect among selves, (b) some of the v treatments have some neighbor effect with other treatments, while remaining treatments have half of that neighbor effect among themselves, (c) one of the v treatments has some neighbor effect with other treatments, while remaining (v – 1) treatments have double of that effect among themselves, and (d) some of the v treatments have some neighbor effect with other, while remaining treatments have double of it among themselves.     

Constructions of Residual Treatment Effects Designs for Comparing Test Treatments with a Control

This article deals with residual treatment effects designs for the purpose of comparing v test treatments with a control treatment when the number of periods is no larger than v + 1. Control balanced residual treatment effects designs, which are Schur-optimal, are considered. Some methods of their construction are given.     

D-Optimal Designs for Covariate Parameters in Block Design Set Up

The problem considered is that of finding D-optimal design for the estimation of covariate parameters and the treatment and block contrasts in a block design set up in the presence of non stochastic controllable covariates, when N = 2(mod 4), N being the total number of observations. It is clear that when N ≠ 0 (mod 4), it is not possible to find designs attaining minimum variance for the estimated covariate parameters. Conditions for D-optimum designs for the estimation of covariate parameters were established when each of the covariates belongs to the interval [?1, 1]. Some constructions of D-optimal design have been provided for symmetric balanced incomplete block design (SBIBD) with parameters b = v, r = k = v ? 1, λ =v ? 2 when k = 2 (mod 4) and b is an odd integer.     

Generalized neighbor designs with block size 3

A generalized neighbor design relaxes the equality condition on the number of times two treatments as neighbors in the design. In this article, we have considered the construction of some classes of generalized neighbor designs with block size k=3 by using the method of cyclic shifts. The distinguishing feature of this construction method is that the properties of a design can easily be obtained from the sets of shifts instead of constructing the actual blocks of the design. A catalog of generalized neighbor designs with block size k=3 is compiled for v∈{5,6,…,18} treatments and for different replications. We provide the reader with a simpler method of construction, and in general the catalog that gives an open choice to the experimenter for selecting any class of neighbor designs.     

Computer-Generated Neighbor Designs

Neighbor designs are useful to remove the neighbor effects. In this article, an algorithm is developed and is coded in Visual C + +to generate the initial block for possible first, second,…, and all order neighbor designs. To get the required design, a block (0, 1, 2,…, k ? 1) is then augmented with (v ? 1) blocks obtained by developing the initial block cyclically mod (v ? 1).     

Optimal partially balanced nested row-column designs

A partially balanced nested row-column design, referred to as PBNRC, is defined as an arrangement of v treatments in b p × q blocks for which, with the convention that p q, the information matrix for the estimation of treatment parameters is equal to that of the column component design which is itself a partially balanced incomplete block design. In this paper, previously known optimal incomplete block designs, and row-column and nested row-column designs are utilized to develop some methods of constructing optimal PBNRC designs. In particular, it is shown that an optimal group divisible PBNRC design for v = mn kn treatments in p × q blocks can be constructed whenever a balanced incomplete block design for m treatments in blocks of size k each and a group divisible PBNRC design for kn treatments in p × q blocks exist. A simple sufficient condition is given under which a group divisible PBNRC is Ψ_f-better for all f> 0 than the corresponding balanced nested row-column designs having binary blocks. It is also shown that the construction techniques developed particularly for group divisible designs can be generalized to obtain PBNRC designs based on rectangular association schemes.     

PARTIALLY EQUINEIGHBOURED DESIGNS

This paper presents further results on a class of designs called equineighboured designs, ED. These designs are intended for field and related experiments, especially whenever there is evidence that observations in the same block are correlated. An ED has the property that every unordered pair of treatments occurs as nearest neighbours equally frequently at each level. Ipinyomi (1986) has defined and shown that ED are balanced designs when neighbouring observations are correlated. He has also presented ED as a continuation of the development of optimal block designs. An ED would often require many times the number of experimental materials needed for the construction of an ordinary balanced incomplete block, BIB, design for the same number of treatments and block sizes. Thus for a relatively large number of treatments and block sizes the required minimum number of blocks may be excessively large for practical use of ED. In this paper we shall define and examine partially equineighboured designs with n concurrences, PED (n), as alternatives where ED are practically unachievable. Particular attention will be given to designs with smaller numbers of blocks and for which only as little balance as possible may be lost.     

Some Classes of Binary Block Neighbor Designs

Neighbor designs are useful to neutralize the neighbor effects. In this paper two classes of these designs are constructed in circular binary blocks of size 4, 8, …, 24. First class consists of six infinite series of nearest neighbor designs in which each pair of distinct treatments appears once as neighbors. Second class also deals with six infinite series of these designs in which each pair of distinct treatments appears twice as neighbors. A catalog of nearest neighbor designs is also compiled in circular binary blocks for odd number of treatments from 23 to 99.     

Circular First- and Second-Order Balanced Repeated Measurements Designs

Sharma (1977 Sharma , V. K. ( 1977 ). Change-over designs with complete balance for first and second order residual effect . Canad. J. Statist. 5 : 121 – 132 .[Crossref] , [Google Scholar]) and Aggarwal et al. (2006 Aggarwal , M. L. , Deng , L.-Y. , Jha , M. K. ( 2006 ). Balanced residual treatment effects designs of first and second order . Statist. Probab. Lett. 76 : 597 – 600 .[Crossref], [Web of Science ®] , [Google Scholar]) considered non circular construction of first- and second-order balanced repeated measurements designs. Sharma et al. (2002 Sharma , V. K. , Varghese , C. , Jaggi , S. ( 2002 ). On optimality of change-over designs balanced for first and second order residual effects . Metron 60 : 153 – 162 . [Google Scholar]) constructed circular first- and second-order balanced repeated measurements designs only for a class with parameters (v, p = 3n, n = v ²) and also showed its universal optimality. In this article, we consider circular construction of first- and second-order balanced repeated measurements designs and strongly balanced repeated measurements designs by using the method of cyclic shifts. Some new circular designs with parameters (v, p, n) for cases p = v, p < v and p > v are given.     

Construction of Neighbor-Balanced Designs in Linear Blocks

Neighbor-balanced designs are useful to remove the neighbor effects in experiments where the performance of a treatment is affected by the treatments applied to its adjacent neighbors. In this article, neighbor-balanced designs are constructed in linear blocks of (i) equal sizes and (ii) two different sizes k ₁ and k ₂.     

Circular balanced repeated measurement designs in periods of three different sizes

Abstract

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. If there is a restriction on the total number of treatments, some experimental units can receive on the total length of time while some experimental units can remain in the trial, then repeated measurements designs with unequal period sizes should be used. In this article, some infinite series are developed to generate the minimal balanced repeated measurement designs in periods of three different sizes p₁, p₂ and p₃, where 2?≤?p₃?<?p₂ ≤ 10 and p₂?<?p₁.     

Some series of proper generalized neighbor designs

Neighbor balanced designs are used to remove the neighbor effects but most of these designs require a large number of blocks. To neutralize the neighbor effects in such situations, GN₂-designs are most desirable. This article deals with the (i) refinement of some series of GN₂-designs constructed by Zafaryab et al. (2010) and (ii) construction of some new series of GN₂-designs in circular blocks of equal size.     

An infinite class of PBIB designs

In this paper, an infinite class of partially balanced incomplete block (PBIB) designs of m+1 associate classes is constructed through the use of a series of row-orthogonal matrices known as partially balanced orthogonal designs (PBOD) of m-associate classes. For the purpose, a series of PBOD is obtained through a method described herein. An infinite class of regular GD designs is also reported.