Some new constructions of circular balanced repeated measurements designs

Repeated measurements designs are widely used in medicine, pharmacology, animal sciences, and psychology. In this article, some infinite series are developed to generate the balanced repeated measurements designs for p (periods) even. For p odd, construction procedures are also described. Catalogues of the proposed designs are also presented for p = 5, 7, 9, when v ≤ 100.     

Some New Series of Partially Balanced Residual Treatment Effects Designs

Blaisdell and Raghavarao (1980 Blaisdell , E. A. , Raghavarao , D. ( 1980 ). Partially balanced change-over designs based on m-associate class PBIB designs . JRSS B 42 : 334 – 338 . [Google Scholar] 1985 Blaisdell , E. A. , Raghavarao , D. ( 1985 ). Efficiency bounds for partially balanced change-over designs based on m-associate class PBIB designs . JRSS B 47 : 132 – 135 . [Google Scholar]) introduced partially balanced residual treatment effects designs and gave methods of construction of these designs. They also gave efficiencies for the estimated direct and residual elementary treatment contrasts of these designs. In this paper, we construct some new series of partially balanced residual treatment effects designs and also give their efficiencies for the estimated direct and residual elementary treatment contrasts.     

Non binary partially neighbor balanced designs for circular blocks

ABSTRACT

Neighbor designs are recommended for the cases where the performance of treatment is affected by the neighboring treatments as in biometrics and agriculture. In this paper we have constructed two new series of non binary partially neighbor balanced designs for v = 2n and v = 2n+1 number of treatments, respectively. The blocks in the design are non binary and circular but no treatment is ever a neighbor to itself. The designs proposed here are partially balanced in terms of nearest neighbors. No such series are known in the literature.     

Partially efficiency-balanced designs-II

efficiency balanced (£R) and partially efficiency balanced (PEB) designs were studied hy Calinski (1971) and Puri and Higam (1971, 1977a). In tais paper we have studied the dual desinas of two classes of PEB designs. It is shown that the dual of any symmetrical PCS design with HN'=N'H is again a PEB design. Also the dual of a PEB(S) with μ₁ = 0 μ₂ = 0and is shown to the again a PEB(S). The relations between PEB designs and linked and partially linked blocks have heen established. As a conseguence, the analysis of linked Mock and partially linkei block designs can he sinrlififid. Sore useful classes of supplencntcd block designs having simple analysis have also been discussed.     

Minimal circular balanced repeated measurement designs in unequal period sizes

Abstract

Repeated measurement designs (RMDs) are widely used in medicine, pharmacology, animal sciences and psychology. In these fields, there are several situations where these designs should be used in periods of different sizes. With the use of RMD, residual effects or carry over effects may arise and balanced RMDs are solution to this problem. In this article, therefore, some infinite series are developed through method of cyclic shifts to obtain circular balanced repeated measurements designs in periods of two different sizes.     

Construction of circular partially balanced-Repeated measurement designs using cyclic shifts

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. These designs balance out the residual effects. The situations where balanced repeated measurements designs require a large number of the subjects, partially-balanced repeated measurements designs should be used. In this paper some infinite series are developed which provide circular partially-balanced repeated measurement designs for p (periods) even. Catalogues of circular partially-balanced repeated measurement designs are also presented for v (treatments) ≤ 100 with p = 5, 7 & 9.     

On the construction of balanced and orthogonal arrays

Two series of three symbol balanced arrays of strength two are constructed. Using special classes of BIB designs, two classes of two symbol orthogonal arrays of strength three are constructed.     

Circular balanced repeated measurement designs in periods of three different sizes

Abstract

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. If there is a restriction on the total number of treatments, some experimental units can receive on the total length of time while some experimental units can remain in the trial, then repeated measurements designs with unequal period sizes should be used. In this article, some infinite series are developed to generate the minimal balanced repeated measurement designs in periods of three different sizes p₁, p₂ and p₃, where 2?≤?p₃?<?p₂ ≤ 10 and p₂?<?p₁.     

Minimal circular strongly balanced repeated measurements designs in periods of three different sizes

Repeated measurements designs (RMD) are widely used in medicine, pharmacology, animal sciences, and psychology. If there is a restriction on the total number of treatments, some experimental units can receive on the total length of time while some experimental units can remain in the trial, then RMD in periods of unequal sizes should be used. In this article, some infinite series are developed to generate the minimal circular strongly balanced RMD in periods of three different sizes p₁, p₂, and p₃, where 2 ≤ p₃ < p₂ ≤ 10.     

Some new construction of circular weakly balanced repeated measurements designs in periods of two different sizes

Abstract

Balanced repeated measurements designs (RMDs) balance out the residual effects. Williams Latin square designs work as minimal combinatorial balanced as well as variance balanced for RMDs for p (period sizes) = v (number of treatments). If minimal balanced RMDs cannot be constructed for the situations where p must be less than v then weakly balanced RMDs should be preferred. In this article, some generators are developed to generate circular weakly balanced RMDs in periods of two different sizes. To obtain the proposed designs, some construction procedures are also described for some of the cases where we could not develop generators.     

On a robustness property of PBIBD

In this paper we study a robustness property of partially balanced incomplete block designs based on association schemes with m classes (PBIBD(m)) against the unavailability of data in the sense that, when any t (a positive integer) observations are unavailable the design remains connected w.r.t. treatment. We characterize the robustness property of PBIBD(m) completely for m=2 and partially for m=3.     

A note on circular neighbor balanced designs

ABSTRACT

This paper describes some methods of constructing circular neighbor balanced and circular partially neighbor balanced block designs for estimation of direct and neighbor effects of the treatments. A class of circular neighbor balanced block designs with unequal block sizes is also proposed.     

Circular First- and Second-Order Balanced Repeated Measurements Designs

Sharma (1977 Sharma , V. K. ( 1977 ). Change-over designs with complete balance for first and second order residual effect . Canad. J. Statist. 5 : 121 – 132 .[Crossref] , [Google Scholar]) and Aggarwal et al. (2006 Aggarwal , M. L. , Deng , L.-Y. , Jha , M. K. ( 2006 ). Balanced residual treatment effects designs of first and second order . Statist. Probab. Lett. 76 : 597 – 600 .[Crossref], [Web of Science ®] , [Google Scholar]) considered non circular construction of first- and second-order balanced repeated measurements designs. Sharma et al. (2002 Sharma , V. K. , Varghese , C. , Jaggi , S. ( 2002 ). On optimality of change-over designs balanced for first and second order residual effects . Metron 60 : 153 – 162 . [Google Scholar]) constructed circular first- and second-order balanced repeated measurements designs only for a class with parameters (v, p = 3n, n = v ²) and also showed its universal optimality. In this article, we consider circular construction of first- and second-order balanced repeated measurements designs and strongly balanced repeated measurements designs by using the method of cyclic shifts. Some new circular designs with parameters (v, p, n) for cases p = v, p < v and p > v are given.     

Construction of neighbor designs of block size 4 for all values of v ≥ 5 by using the method of addition

In this article, a general method of construction of neighbor block designs is given. The designs are constructed using variation of a simple method which we refer to as the method of addition (renamed as the method of cyclic shifts). We give complete solution of neighbor balanced designs for k = 4 for any value of v. We also give many series of generalized neighbor designs (GNDs). In the last section, we have constructed GNDs in a sequential manner (as Did John 1981) for v ≤ 50 and r is multiple of k.     

Designs Robust against Violation of Normality Assumption in the Standard F-test

In this article, designs are found for which the F-test of analysis of variance is insensitive to violation of normality assumption. Atiqullah (1962 Atiquallah, M. (1962). The estimation of residual variance in quadratically balanced least-squares problems and the robustness of the F-test. Biometrika 49: 83–91.[Crossref], [Web of Science ®] , [Google Scholar]) proved that the F-test for treatments adjusting for blocks in the intra-block analysis of a balanced incomplete block design is robust against non-normality in the observations. Here an attempt has been made to identify other designs robust in this sense. In particular, it is observed that for testing relevant hypothesis, a partially balanced incomplete block design in block design setup, under certain conditions, is robust. Robustness of a balanced treatment incomplete block design and a partially balanced treatment incomplete block design (Biswas, 2012 Biswas, A. (2012). Block designs robust against the presence of an aberration in a treatment-control setup. Commun Statist.Theor Methods 41: 920–933.[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]), in treatment-control design setup, is also studied. Moreover, a new measure of robustness is introduced for further study. The performance of the F-test in presence of non-normality in the observations for a quadratically balanced design is also examined.     

Construction of Efficient Multi-Level k-Circulant Supersaturated Designs

This article proposes an algorithm to construct efficient balanced multi-level k-circulant supersaturated designs with m factors and n runs. The algorithm generates efficient balanced multi-level k-circulant supersaturated designs very fast. Using the proposed algorithm many balanced multi-level supersaturated designs are constructed and cataloged. A list of many optimal and near optimal, multi-level supersaturated designs is also provided for m ≤ 60 and number of levels (q) ≤10. The algorithm can be used to generate two-level k-circulant supersaturated designs also and some large optimal two-level supersaturated designs are presented. An upper bound to the number of factors in a balanced multi-level supersaturated design such that no two columns are fully aliased is also provided.     

Regular group divisible designs and Bhaskar Rao designs with block size three

Some recursive constructions are given for Bhaskar Rao designs. Using examples of these designs found by Shyam J. Singh, Rakesh Vyas and new ones given here we show the necessary conditions λ≡0 (mod 2), λυ(υ?1)≡0 (mod 24) are sufficient for the existence of Bhaskar Rao designs with one association class and block size 3. This result is used with a result of Street and Rodger to obtain regular partially balanced block designs with 2υ treatments, block size 3, λ₁=0, group size 2 and υ groups.     

Some extensions of circular balanced and circular strongly balanced repeated measurements designs

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences, and psychology. In this paper the works of Iqbal and Tahir (2009 Iqbal, I., and M. H. Tahir. 2009. Circular strongly balanced repeated measurements designs. Communications in Statistics—Theory and Methods 38:3686–96.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and Iqbal, Tahir, and Ghazali (2010 Iqbal, I., M. H. Tahir, and S. S. A. Ghazali. 2010. Circular first- and second-order balanced repeated measurements designs. Communications in Statistics—Theory and Methods 39:228–40.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) are generalized for the construction of circular-balanced and circular strongly balanced repeated measurements designs through the method of cyclic shifts for three periods.     

COMPUTER-AIDED CONSTRUCTION OF SMALL (M, S)-OPTIMAL INCOMPLETE BLOCK DESIGNS

A new exchange algorithm for the construction of (M, S)-optimal incomplete block designs (IBDS) is developed. This exchange algorithm is used to construct 973 (M, S)-optimal IBDs (v, k, b) for v= 4,…,12 (varieties) with arbitrary v, k (block size) and b (number of blocks). The efficiencies of the “best” (M, S)-optimal IBDs constructed by this algorithm are compared with the efficiencies of the corresponding nearly balanced incomplete block designs (NBIBDs) of Cheng(1979), Cheng & Wu (1981) and Mitchell & John(1976).